This thread contains logger definitions for the M5.2 DME used for the M44B19 motors.
These definitions should work with both 667 and 668 DMEs.
Parameters currently supported:
Code:
Mass Air Flow
Engine Speed
Vehicle Speed
Throttle Position
Engine Load
Intake Air Temperature
Coolant Temperature
Ignition Angle
Fuel Injector Pulse Width
Idle Air Control Valve
Battery Voltage
Lambda Integrator - Bank 1
Lambda Integrator - Bank 2
*various switches - these will lower logging speed when enabled
The definitions will be managed on github as that will allow me greater flexibility in managing contributions:
https://github.com/ba114/M5.2
