RomRaider

I am doing some work on my daugthers 2008 Subaru Outback AT and would like to change a couple of the ODBII codes to off, etc.

The SSM2 ECU ID is 5212168007

ECU flash reads the ECU fine, but I cannot find an ECU definition for this this even in the experimental ECU threads.

If someone has a ECU def for this or can create one it would be appreciated.

thanks
Tom

As attached.

Looking for the Romraider ECU def file for this same ECU ID 5212168007. (Use is to activate the Logger Learning Table Values and extended parameters, which I understand require the specific ECU definition).

Based on the first post's reference to ECU Flash, I suspect the .xml definition file attached in post #2 is for that program, not Romraider. Is this correct, or is the .xml for use with Romraider?

If the ECU hasn't been defined for Romraider, can it be done from the hex file attached in the first post?

Edit: tried the ECU def .xml but it didn't work, as was suspected. So now hoping the ECU def file for use with Romraider can be made up based on the hex file in the first post.

Has anyone resolved this? I also have an 08 OBW 2.5i AT...

Thanks!

What about using this... https://github.com/TD-D/SubaruDefs/blob/Alpha/RomRaider/ecu/RR_EZ1GC00B.xml

Same ECU ID, slightly different CAL ID