RomRaider

definition request: 2007 Subaru outback 2.5i MT
ECU ID: 4B12187008
Case ID: 88281AG57A
Internal ID: E2UG002B

Although I may be wrong, I belive i need a custom definition for my car. "07 E2UE102B# (MT)" has a "UE" instead of "UG" i have also tried "E2UG001B (4B12148007)" but again, this doesn't work because of the different ending letters. I have also tried different forester/legacy/impreza 2.5i definitions that look similar with no luck; which leaves me here.

I have linked the SRF file. thanks to anyone who helps!

If you have a complete definition for E2UE102B, I'd use that calibration ROM.

The first 2000 bytes of E2UE102B, E2UG002B, and E2UG001B are the same, and would appear that they cross flash.

I'd go for whichever Outback 2.5i ROM has the most complete definition, *is designated MT*, and has the first 2000 bytes being the same.

I have tried to use both RRdefs and ecu flashdefs: E2UE102B and E2UG001B and others with no luck. I am new to opensource but I believe I am doing everything right (i could have missed a step);
downloaded latest ecuflash/romraider, pulled stock rom with an openport 2.0 and saved as a bin, installed the latests definitions for RR/ecuflash (including adding experimental defs manually) opened the stock bin file on romraider and opened various defs.

I am no expert but when i opened the different defs in RR, the tables look strange for almost every parameter. as seen in pictures.
I dont know what i am doing wrong

i also added the stock rom as a .bin file for ease of access...