RomRaider

I need to log the jdm sti ignition variables:

Ign Correction (Learnt Corr)
Ign Corr (Coarse corr)
Ign Corr (Neg Knock comp)

The car is 03sti, rom revision A4TE002B

Here is my logger xml file, i found the variables there, but i dont know if they are valid or how to get them work.

any help appreciated.

If they don't show up in the list, then either they are not valid for your rom or SSM id is not right (I haven't verified these three). Looking at description for these parameters, they appear to be the same as what I was planning to add for all 16-bit roms to the next logger def release: feedback correction, timing advance, fine learning correction. I will also check to see if these existing ids are correct for jdm and if so, I'll leave them in there.

So, the short answer is, wait for the next logger def release.

SSM id is not right i think, other logger shows them fine. (DD)

I'll check it out for the next logger def release.