ECU definition for subaru forester diesel 2011

paulspchelp · **Joined:** Mon Dec 19, 2016 10:43 pm **Posts:** 1

hi all i am after ECU definition for Subaru forester diesel 2011
Calibration ID: JP4A110A
CVN: 1D3EAA53 E870F38D

thanks

FrSTi · **Posted:** Thu Aug 10, 2017 9:24 am

paulspchelp wrote:

hi all i am after ECU definition for Subaru forester diesel 2011
Calibration ID: JP4A110A
CVN: 1D3EAA53 E870F38D

thanks

Not that much reply here...
I am looking for same defs, or maybe can someone confirm I can overwrite JP4A110A file using JP4A130A in the same hardware ???

Jochen_145 · **Joined:** Wed Nov 10, 2010 7:56 am **Posts:** 418

FrSTi wrote:

or maybe can someone confirm I can overwrite JP4A110A file using JP4A130A in the same hardware ???

Yes, you can, because JP4A130A is official Subaru update of JP4A110A..

Haveing your Forester in regular maintaindance, the dealer should always update to lastest software, so I see no need to work on deffinitions based on old software.

BR Jochen

Dieselforry · **Joined:** Thu Jan 18, 2018 6:54 am **Posts:** 27

Jochen_145 wrote:

FrSTi wrote:

or maybe can someone confirm I can overwrite JP4A110A file using JP4A130A in the same hardware ???

Yes, you can, because JP4A130A is official Subaru update of JP4A110A..

Haveing your Forester in regular maintaindance, the dealer should always update to lastest software, so I see no need to work on deffinitions based on old software.

BR Jochen

Will JP4A130A work with JP4A100A also?
I car had always been maintained by dealer but never had an update...
Is immobiliser data also stored in ecu rom?

Jochen_145 · **Joined:** Wed Nov 10, 2010 7:56 am **Posts:** 418

Yes it will

Same like post bevor: all JP4A1xxA SW work with EURO5 ECU on the Forester or Impreza and were just Workshop-updates, with should be done while maintaindance.

IMMO is mainly part of EEPROM, not Flash, so update is not a problem.
There is a way to tried IMMO in dump, but there is no need, as fare as the ECU belongs to the car, it works in

gluci629 · **Joined:** Sat Nov 23, 2019 2:13 am **Posts:** 8

Attachment:

ECUFLASH.jpg [ 459.68 KiB | Viewed 5491 times ]

Hello! I have 2 quenstions, if somebody can help me, you can tune directly in ecuflash, how is in tht picture, and JP4A100A can be changed with JP4A130A, without any changes, just write with ecuflash and thre is no problem, and if i change maps on this JP4A130A, ecuflash check checksum or i have to do it with other programs?

gluci629 · **Joined:** Sat Nov 23, 2019 2:13 am **Posts:** 8

No one knows?

Jochen_145 · **Joined:** Wed Nov 10, 2010 7:56 am **Posts:** 418

gluci629 wrote:

you can tune directly in ecuflash, how is in tht picture

Yes, checksumms will be corrected and you can wirte dump to ECU after chancing..

Quote:

and JP4A100A can be changed with JP4A130A, without any changes, just write with ecuflash and thre is no problem,

Yes..

Quote:

and if i change maps on this JP4A130A, ecuflash check checksum or i have to do it with other programs?

ECUflash will do the job

gluci629 · **Joined:** Sat Nov 23, 2019 2:13 am **Posts:** 8

thanks!

gluci629 · **Joined:** Sat Nov 23, 2019 2:13 am **Posts:** 8

Hy! Has anyone a jp4a100 tuned just for an example?

gluci629 · **Joined:** Sat Nov 23, 2019 2:13 am **Posts:** 8

I play with this file with ecuflash a person with experience can tell if is god what i make!

gluci629 · **Joined:** Sat Nov 23, 2019 2:13 am **Posts:** 8

hy! who have a eur 5 diesel tuned corectly just for an example?

FrSTi · **Posted:** Sun Feb 09, 2020 10:32 am

gluci629 wrote:

hy! who have a eur 5 diesel tuned corectly just for an example?

Send me an email and I can share some modded euro5 JP4A130A rom.

gluci629 · **Joined:** Sat Nov 23, 2019 2:13 am **Posts:** 8

acsclio · **Joined:** Tue Mar 27, 2012 1:50 pm **Posts:** 15

Hello
any info of a etunner to a diesel forester

i have a rom from a forester 2.0 6mt 2014 diesel is the same of this rom
and need to tune it..

thanks

RomRaider

Forum rules

ECU definition for subaru forester diesel 2011

Who is online