RomRaider

I had great trouble even pulling this rom, but here it is managed to be pulled.

However, it cannot be again loaded into ecuflash without a definition error message. It is very simlar to the EP5G211A rom which is available with definition on the romraider forums but for a manual transmission; the romraider definition for the latter enables loading EP5G211B into romraider by simple edits of the xml replacing EP5G211A with EP5G211B, but i am not sure it is a straight one-to-one correspondence when loaded this way; since there are missing codes in DTC section such as the active one P2401 making flash the vehicle cluster.

But the same does not work in ecuflash; i might try the same again, however. And if someone could take a look, that would be a fantasy.

omg thanks

ep5g211a references:
https://www.romraider.com/forum/viewtopic.php?f=34&t=11645
https://www.romraider.com/forum/viewtopic.php?f=8&t=11588
ep5g300:
https://www.romraider.com/forum/viewtopic.php?t=17747

I went through and compared EP5G211b to similar ROM EP5F400C in a hex editor to get the correct addresses for this rom. Attached are the xml files for ECUFLASH, as well as the Excel sheet that I used to show my work.

Have fun with your Subaru.