RomRaider

Hi Everyone. Really hoping to get some help on this.

I have a UK 2005 Subaru Impreza 2.0 WRX

Ive Bought a Tactrix openport 2.0 and downloaded ECUFlash and Romraider.

Ive managed to pull the Map using the 68HC16 ECU definition on ECUFlash. It originally tried to save as a .srf file but have now saved it to a .bin file.

I can see the Map tables on ECUFlash but when i try and put it on Romraider it says "ECU definitions not found. would you like to choose one?"

ive downloaded the latest ECU definitions and done all the tutorial videos on how to install it all correctly but it still wont work?

do the latest ECU definitions work for my model of car and ECU?

Also wondering weather i could pay someone to rewrite my map?

Any help would be greatly appreciated

What ECU or CAL ID is it?

sorry for the late reply. its a 68HC16 ECU if thats what you mean?

There seems to be a lot of definition codes on here starting with A then usually some numbers but i cant seem to find that sort of code for this ECU?

I really do appreciate your help

Thats the only code i can find.. i do have some numbers on the ECU as follows: 112200-5142 and 22611AH751

and *225142G* below a barcode

it also says 6C in big letters?

I hope this helps?

When you connect the Logger, what ECU ID is reported at the bottom of the window?

ECU ID: 3D04EA4605

Hope this helps

Carberry

Ahh that makes sense... thank you.

Can you send me your email please as I went onto your link and I believe you can help with my map?

I can send you the full details of what has been done on my car ect.

Thanks again