RomRaider

Hi, I started from scratch and have been defining a ROM for 2013 Outback 2.0D CVT, based on comparing maps to FE7G001C.

I've managed to flash an EGR (changing hysteresis maps) and DPF delete (changing EGT sensor calibration, soot tables and post injection maps).

I'm really struggling to find the DTC's in the ROM. I wonder if someone could load it up in IDA etc, and extract the DTC?

I'm not very familiar with diesel cars. But looks like at 0x14C1A2 CEL switches are start's. At 0x14C2D4 DTC's list start's.
Try to change some of 0x04 to 0x00 for checking.

More likely it starts at 0x14BBD4 because that data looks very similar to DTC area from already defined ROM with CAL ID JP4A130A. Someone who is familiar with diesel ROMs needed.