Legacy 2008 2.5i edm def needed

x38 · **Joined:** Fri Sep 14, 2012 4:50 am **Posts:** 10

Hi there. Can anyone help?

dschultz · **Posted:** Fri Sep 14, 2012 9:20 am

AT or MT?

td-d · **Posted:** Fri Sep 14, 2012 10:20 am

It's an AT:

Code:

ROM:00002000 aE2tb101l_0:    .sdata "E2TB101L"       ; DATA XREF: ROM:off_FFB80o
ROM:00002000                 .data.b 0
ROM:00002009 a25th4nEuAt:    .sdata "25TH4N EU AT           "

throttlehappy · **Posted:** Fri Sep 14, 2012 11:15 pm

Inherits perfectly from E2TB102M

x38 · **Joined:** Fri Sep 14, 2012 4:50 am **Posts:** 10

throttlehappy thanks for advice. i just copied E2TB102M definition, than replaced E2TB102M to E2TB101L and my ecu opens but with errors. Al errors started with DTC tables, romraider says that ecu or definition is corrupted. Any help?

dschultz · **Posted:** Mon Sep 17, 2012 10:48 pm

The two ROMs are not identical so it needs its own def to account for the differences.

throttlehappy · **Posted:** Tue Sep 18, 2012 7:44 am

x38 wrote:

throttlehappy thanks for advice. i just copied E2TB102M definition, than replaced E2TB102M to E2TB101L and my ecu opens but with errors. Al errors started with DTC tables, romraider says that ecu or definition is corrupted. Any help?

You could remove the DTC/CEL codes at the bottom of EcuFlash definition

The DBW, ignition and fuel tables are atleast safe to alter

x38 · **Joined:** Fri Sep 14, 2012 4:50 am **Posts:** 10

throttlehappy wrote:

You could remove the DTC/CEL codes at the bottom of EcuFlash definition

The DBW, ignition and fuel tables are atleast safe to alter

honestly i was wondering to edit this ecu to turn off P0420 error. maybe you can give an advice how to do this? it's very often error here on subies, just wanted to try to turn off this dtc on my own vehicle to offer this in future for clients.

td-d · **Posted:** Tue Sep 18, 2012 11:23 am

x38 wrote:

throttlehappy wrote:

You could remove the DTC/CEL codes at the bottom of EcuFlash definition

The DBW, ignition and fuel tables are atleast safe to alter

honestly i was wondering to edit this ecu to turn off P0420 error. maybe you can give an advice how to do this? it's very often error here on subies, just wanted to try to turn off this dtc on my own vehicle to offer this in future for clients.

Replace the current CEL codes at the bottom of the definition with these, and you will be able to switch all the codes on / off:

Code:

    <table name="(P0000) PASS CODE (NO DTC DETECTED)" storageaddress="88981" />
    <table name="(P0000) PASS CODE (NO DTC DETECTED) " storageaddress="88982" />
    <table name="(P0026) OSV SOLENOID VALVE CIRCUIT RANGE/PERF B1" storageaddress="889DC" />
    <table name="(P0028) OSV SOLENOID VALVE CIRCUIT RANGE/PERF B2" storageaddress="889D9" />
    <table name="(P0030) FRONT O2 SENSOR RANGE/PERF" storageaddress="889AF" />
    <table name="(P0031) FRONT O2 SENSOR LOW INPUT" storageaddress="88990" />
    <table name="(P0032) FRONT O2 SENSOR HIGH INPUT" storageaddress="8898E" />
    <table name="(P0037) REAR O2 SENSOR LOW INPUT" storageaddress="8898F" />
    <table name="(P0038) REAR O2 SENSOR HIGH INPUT" storageaddress="8898D" />
    <table name="(P0076) INTAKE VALVE CIRCUIT LOW (BANK 1)" storageaddress="889DE" />
    <table name="(P0077) INTAKE VALVE CONTROL HIGH (BANK 1)" storageaddress="889DD" />
    <table name="(P0082) INTAKE VALVE CONTROL LOW (BANK 2)" storageaddress="889DB" />
    <table name="(P0083) INTAKE VALVE CONTROL HIGH (BANK 2)" storageaddress="889DA" />
    <table name="(P0102) MAF SENSOR LOW INPUT" storageaddress="8893D" />
    <table name="(P0103) MAF SENSOR HIGH INPUT" storageaddress="8893E" />
    <table name="(P0107) MAP SENSOR LOW INPUT" storageaddress="88991" />
    <table name="(P0108) MAP SENSOR HIGH INPUT" storageaddress="88992" />
    <table name="(P0112) IAT SENSOR LOW INPUT" storageaddress="8898A" />
    <table name="(P0113) IAT SENSOR HIGH INPUT" storageaddress="8898B" />
    <table name="(P0117) COOLANT TEMP SENSOR LOW INPUT" storageaddress="88946" />
    <table name="(P0118) COOLANT TEMP SENSOR HIGH INPUT" storageaddress="88947" />
    <table name="(P0122) TPS A LOW INPUT" storageaddress="88944" />
    <table name="(P0123) TPS A HIGH INPUT" storageaddress="88945" />
    <table name="(P0125) INSUFFICIENT COOLANT TEMP (FUELING)" storageaddress="88949" />
    <table name="(P0131) FRONT O2 SENSOR LOW INPUT" storageaddress="88984" />
    <table name="(P0132) FRONT O2 SENSOR HIGH INPUT" storageaddress="88986" />
    <table name="(P0133) FRONT O2 SENSOR SLOW RESPONSE" storageaddress="8896E" />
    <table name="(P0134) FRONT O2 SENSOR NO ACTIVITY" storageaddress="889AD" />
    <table name="(P0140) REAR O2 SENSOR NO ACTIVITY" storageaddress="889FB" />
    <table name="(P0171) SYSTEM TOO LEAN" storageaddress="88978" />
    <table name="(P0172) SYSTEM TOO RICH" storageaddress="88979" />
    <table name="(P0197) OIL TEMP SENSOR LOW" storageaddress="889D5" />
    <table name="(P0198) OIL TEMP SENSOR HIGH" storageaddress="889E0" />
    <table name="(P0222) TPS B LOW INPUT" storageaddress="889B7" />
    <table name="(P0223) TPS B HIGH INPUT" storageaddress="889B8" />
    <table name="(P0301) MISFIRE CYLINDER 1" storageaddress="8897A" />
    <table name="(P0302) MISFIRE CYLINDER 2" storageaddress="8897B" />
    <table name="(P0303) MISFIRE CYLINDER 3" storageaddress="8897C" />
    <table name="(P0304) MISFIRE CYLINDER 4" storageaddress="8897D" />
    <table name="(P0327) KNOCK SENSOR 1 LOW INPUT" storageaddress="88942" />
    <table name="(P0328) KNOCK SENSOR 1 HIGH INPUT" storageaddress="88943" />
    <table name="(P0335) CRANKSHAFT POS. SENSOR A MALFUNCTION" storageaddress="88938" />
    <table name="(P0340) CAMSHAFT POS. SENSOR A MALFUNCTION" storageaddress="8893B" />
    <table name="(P0400) EGR FLOW" storageaddress="88977" />
    <table name="(P0420) CAT EFFICIENCY BELOW THRESHOLD" storageaddress="88974" />
    <table name="(P0458) EVAP PURGE VALVE CIRCUIT LOW" storageaddress="88969" />
    <table name="(P0459) EVAP PURGE VALVE CIRCUIT HIGH" storageaddress="8896A" />
    <table name="(P0462) FUEL LEVEL SENSOR LOW INPUT" storageaddress="8894A" />
    <table name="(P0463) FUEL LEVEL SENSOR HIGH INPUT" storageaddress="8894B" />
    <table name="(P0500) VEHICLE SPEED SENSOR A" storageaddress="8893F" />
    <table name="(P0512) STARTER REQUEST CIRCUIT" storageaddress="8894F" />
    <table name="(P0519) IDLE CONTROL MALFUNCTION (FAIL-SAFE)" storageaddress="889AA" />
    <table name="(P0600) SERIAL COMMUNICATION LINK" storageaddress="889C7" />
    <table name="(P0604) CONTROL MODULE RAM ERROR" storageaddress="8893C" />
    <table name="(P0605) CONTROL MODULE ROM ERROR" storageaddress="889CC" />
    <table name="(P0607) CONTROL MODULE PERFORMANCE" storageaddress="889BF" />
    <table name="(P0638) THROTTLE ACTUATOR RANGE/PERF" storageaddress="889BE" />
    <table name="(P0691) RADIATOR FAN CIRCUIT LOW" storageaddress="88962" />
    <table name="(P0692) RADIATOR FAN CIRCUIT HIGH" storageaddress="88963" />
    <table name="(P0700) TRANSMISSION CONTROL SYSTEM" storageaddress="889D8" />
    <table name="(P0851) NEUTRAL SWITCH INPUT LOW" storageaddress="88953" />
    <table name="(P0852) NEUTRAL SWITCH INPUT HIGH" storageaddress="88957" />
    <table name="(P1160) ABNORMAL RETURN SPRING" storageaddress="889B9" />
    <table name="(P1492) EGR SOLENOID SIGNAL 1 MALFUNCTION (LOW)" storageaddress="88958" />
    <table name="(P1493) EGR SOLENOID SIGNAL 1 MALFUNCTION (HIGH)" storageaddress="88959" />
    <table name="(P1494) EGR SOLENOID SIGNAL 2 MALFUNCTION (LOW)" storageaddress="8895A" />
    <table name="(P1495) EGR SOLENOID SIGNAL 2 MALFUNCTION (HIGH)" storageaddress="8895B" />
    <table name="(P1496) EGR SIGNAL 3 CIRCUIT LOW" storageaddress="8895C" />
    <table name="(P1497) EGR SOLENOID SIGNAL 3 MALFUNCTION (HIGH)" storageaddress="8895D" />
    <table name="(P1498) EGR SIGNAL 4 CIRCUIT LOW" storageaddress="8895E" />
    <table name="(P1499) EGR SIGNAL 4 CIRCUIT HIGH" storageaddress="8895F" />
    <table name="(P1519) IMRC STUCK CLOSED" storageaddress="88A0B" />
    <table name="(P1520) IMRC CIRCUIT MALFUNCTION" storageaddress="88A0A" />
    <table name="(P1560) BACK-UP VOLTAGE MALFUNCTION" storageaddress="88999" />
    <table name="(P1616) SBDS INTERACTIVE CODES" storageaddress="88A09" />
    <table name="(P2101) THROTTLE ACTUATOR CIRCUIT RANGE/PERF" storageaddress="889BC" />
    <table name="(P2102) THROTTLE ACTUATOR CIRCUIT LOW" storageaddress="889BA" />
    <table name="(P2103) THROTTLE ACTUATOR CIRCUIT HIGH" storageaddress="889BB" />
    <table name="(P2109) TPS A MINIMUM STOP PERF" storageaddress="889B6" />
    <table name="(P2122) TPS D CIRCUIT LOW INPUT" storageaddress="889C3" />
    <table name="(P2123) TPS D CIRCUIT HIGH INPUT" storageaddress="889C4" />
    <table name="(P2127) TPS E CIRCUIT LOW INPUT" storageaddress="889C1" />
    <table name="(P2128) TPS E CIRCUIT HIGH INPUT" storageaddress="889C2" />
    <table name="(P2135) TPS A/B VOLTAGE" storageaddress="889C5" />
    <table name="(P2138) TPS D/E VOLTAGE" storageaddress="889C0" />
    <table name="(P2228) BARO. PRESSURE CIRCUIT LOW INPUT" storageaddress="889EA" />
    <table name="(P2229) BARO. PRESSURE CIRCUIT HIGH INPUT" storageaddress="889E9" />
    <table name="(P2503) CHARGING SYSTEM VOLTAGE LOW" storageaddress="889E2" />
    <table name="(P2504) CHARGING SYSTEM VOLTAGE HIGH" storageaddress="889E1" />

x38 · **Joined:** Fri Sep 14, 2012 4:50 am **Posts:** 10

many thanks! romraider now reads this ecu only with 1 error:
Table: Force Pass Readiness Monitor
Table editing has been disabled.

and the last question: i want to check if it really will work - turning off DTC in ecu. I want to simulate some kind of situations. For example: I will turn off P0037 and P0038 errors, write this ecu to vehicle, and physically turn off second O2 sensor. Theoretically I will not see the "check engine" light after engine start. Am I right?

throttlehappy · **Posted:** Fri Sep 21, 2012 9:02 am

x38 wrote:

many thanks! romraider now reads this ecu only with 1 error:
Table: Force Pass Readiness Monitor
Table editing has been disabled.

and the last question: i want to check if it really will work - turning off DTC in ecu. I want to simulate some kind of situations. For example: I will turn off P0037 and P0038 errors, write this ecu to vehicle, and physically turn off second O2 sensor. Theoretically I will not see the "check engine" light after engine start. Am I right?

Turning off the rear o2 sensor will delete the code but the engine will run rich if you remove the actual rear o2 sensor. You need to turn the O2 sensor off in the tune.

td-d · **Posted:** Fri Sep 21, 2012 10:04 am

Definition is formally up: viewtopic.php?f=34&t=8813

glzg947 · **Joined:** Mon Jan 09, 2023 6:24 am **Posts:** 3

throttlehappy wrote:

Turning off the rear o2 sensor will delete the code but the engine will run rich if you remove the actual rear o2 sensor. You need to turn the O2 sensor off in the tune.

How to do it? How to turn the O2 sensor off in the tune?
Which table and where should be copied to ROM?
Sorry for the question, I'm still a beginner :oops:

throttlehappy · **Posted:** Wed Jan 18, 2023 9:51 am

glzg947 wrote:

throttlehappy wrote:

Turning off the rear o2 sensor will delete the code but the engine will run rich if you remove the actual rear o2 sensor. You need to turn the O2 sensor off in the tune.

How to do it? How to turn the O2 sensor off in the tune?
Which table and where should be copied to ROM?
Sorry for the question, I'm still a beginner :oops:

What are you trying to do? Run the car without a Rear O2 sensor?

glzg947 · **Joined:** Mon Jan 09, 2023 6:24 am **Posts:** 3

I want to disable the ecology: catalyst control, EGR. I want the engine to run normally, not rich. The rear oxygen sensor remains in the car. Someday it will fail and the ECU will try to adjust the mixture according to its indications.
If I turn off only the error code (CEL), then I will not see only the indication.
But the ECU will correct the mixture, but it must assume that nothing happened

In the end, it turns out that yes - I'm kind of trying to start the engine without rear O2
At the same time, the ECU should consider that it never had rear O2 and should not correct anything.
it turns out such a situation

RomRaider

Forum rules

Legacy 2008 2.5i edm def needed

Who is online