|
RomRaider
Documentation
Community
Developers
|
 
|
Page 1 of 1
|
[ 9 posts ] |
|
| Author |
Message |
|
E36Z
|
Post subject: MS43 software version determination  Posted: Wed Mar 29, 2017 9:14 pm |
|
 |
| Newbie |
Joined: Wed Mar 29, 2017 9:09 pm
Posts: 2
|
|
How do I determine which of the software versions (example MS430056) I'm running in order to use the proper bin definitions.
|
|
| Top |
|
 |
|
pazi88
|
Post subject: Re: MS43 software version determination Posted: Thu Mar 30, 2017 4:18 am |
|
|
| Senior Member |
Joined: Mon May 18, 2015 8:14 am
Posts: 1042
Location: Oulu, Finland (English/Finnish)
|
|
in full read check address 0x6ffba in some binary editor. And in partial address 0x42. For example XVI32 is good binary editor.
|
|
| Top |
|
|
|
E36Z
|
Post subject: Re: MS43 software version determination Posted: Fri Mar 31, 2017 6:06 pm |
|
|
| Newbie |
Joined: Wed Mar 29, 2017 9:09 pm
Posts: 2
|
|
430066
Awesome, thanks a ton!
|
|
| Top |
|
|
|
dx4picco
|
Post subject: Re: MS43 software version determination Posted: Sat Mar 02, 2019 4:44 pm |
|
|
| Experienced |
Joined: Thu Nov 15, 2018 11:00 am
Posts: 718
Location: Europe, France (French/English)
|
Hexa noobi here, I tried to find the software version of this ecu to be able to open it in tuner pro as RR isn't defined.  I don't understand a thing in this hexadecimal world  the blue cell is the one 6ffba I believe, how am I supposed to to read soft version in there?
You do not have the required permissions to view the files attached to this post.
|
|
| Top |
|
|
|
Lambda1
|
Post subject: Re: MS43 software version determination Posted: Sat Mar 02, 2019 5:12 pm |
|
|
| Experienced |
Joined: Sat Jan 14, 2017 5:46 pm
Posts: 534
|
|
Its written there ... have a look at your picture:
MS4300x66 => Version is 66.
|
|
| Top |
|
|
|
dx4picco
|
Post subject: Re: MS43 software version determination Posted: Sat Mar 02, 2019 5:42 pm |
|
|
| Experienced |
Joined: Thu Nov 15, 2018 11:00 am
Posts: 718
Location: Europe, France (French/English)
|
|
I appreciate having the solution,
but can you explain me how you read this?
Its stated here HEX 34 <> 52 decimal. Why ver 66?
|
|
| Top |
|
|
|
Lambda1
|
Post subject: Re: MS43 software version determination Posted: Sun Mar 03, 2019 7:23 am |
|
|
| Experienced |
Joined: Sat Jan 14, 2017 5:46 pm
Posts: 534
|
|
Like mostly ... HEX => ASCII, sometimes you have to think about bigendian, littleendian ...
But MS41,MS42,MS43 are comfortable. HEX => ASCII and you done.
34 = 4
33 = 3
30 = 0
30 = 0
36 = 6
36 = 6
=> 4 3 0 0 6 6 => 430066 => last two digits => 66
|
|
| Top |
|
|
|
dx4picco
|
Post subject: Re: MS43 software version determination Posted: Sun Mar 03, 2019 7:47 am |
|
|
| Experienced |
Joined: Thu Nov 15, 2018 11:00 am
Posts: 718
Location: Europe, France (French/English)
|
|
Wow ok, now it makes sense. So the table on the right is the ascii translation and I can read directly 430066.
I thought the SW version was contained in the one bit 6ffba.
Thank you!
|
|
| Top |
|
|
|
Lambda1
|
Post subject: Re: MS43 software version determination Posted: Mon Mar 04, 2019 6:04 am |
|
|
| Experienced |
Joined: Sat Jan 14, 2017 5:46 pm
Posts: 534
|
|
Right. But only in your specific configuration right side is ascii you also can show other formats there.
In my opinion best is some people at the beginning have a look for formats like, BIN, Oktal, DEC, HEX, Ascii and transformation between.
Also they should have a look in Hex-Editor to learn a bit about, RR is nice but so much comfortable.
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 9 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 0 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
