welaish wrote:
2. During the long drive logs sometimes you see something on the gauges and you would like to mark this areas on the log. so you can quickly check the marked spot without searching the whole log for it.
The way I do it is to add a switchable item to the log paramters. Something that you wouldn't necessarily use during typical runs. I use the cruise control on/off switch (06 sti) and tap that whenever something happens that I want to look at later on and it will show as a spike (double tap) or just look for any change between on and off each time you press it... doesn't matter if it's off or on just need a visual change to easily identify.
Have a look under the switches tab in the logger and see what suits.
Also +1 for MegaLog Viewer, went for it just last night and definitely easier than trawling through CSV's or using something like the datazap site