RomRaider

Dont know if this has been handled already, but I found that pulling flkc table via ltv gives incorrect values. I believe romraider uses ecuparam "E173" as the flkc table address and the carberry def had "E173" assigned to knock reset counter. Copied knock reset counter into a new ecuparam "E186" and replaced "E12", "E26", "E41", "E58", "E95", "E101" and "E173" with versions from romraider logger def v370. I currently have a clean flkc table so I can only confirm that the table now reads 0 with no embelishments. I also added the DTC list from v370 although I didn't test that the codes worked correctly, just that romraider was able to load the list of them.