RomRaider

Hi, im trying to connect to a sti 2021 (Southamerica Market), with the alpha def i was able to dump the rom using ecuflash, but ecuflash pick a incorrect definition, if i connect to romraider i got this:
ECU ID
AZ1N100M OBD CAN
5F40006023 PROTOCOLO SSM CAN

Any one can helpme with the correct definitions

zip up the rom and attach it to your post - will improve your chances of someone having/building a def for it.

Done, i founded more information

ROM Type: SUBARU_DENSO_7058S
Calibration ID: AZ1N100M
ECU ID: 5F40006023

AZ1N1MMM - MerpMod

Hi, do you know how can i log with romraider? when i run romraider logger the engine stop

running the logger shouldn't break anything as it's not sending any instructions to the car, are you sure the OBD port is hooked up right and you dont have anything strange in your romraider settings? have you tried removing romraider and the romraider settings file then reinstalling it?

Thats strange the tuner made some runs with me and he was connected with romraider, but if i connect an elm scanner the engine stop, if i connect tactrix cable the engine stop, before the tunning i was able to connect with the elm scanner, im thinking rollback all and tune again, but i dont have the stock rom.

if the rom is AZ1N100M you can get a stock one here:
https://www.romraider.com/forum/viewtopic.php?f=35&t=7591

You can find definitions in the first post: viewtopic.php?f=37&t=14020