|
RomRaider
Documentation
Community
Developers
|
| Author |
Message |
|
throttlehappy
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits  Posted: Mon Mar 05, 2012 5:49 am |
|
 |
| Senior Member |
Joined: Sat Feb 12, 2011 7:27 pm
Posts: 2031
Location: Northern NSW
|
Hey, Can I please get the A8DH200O and A8DH200V correction and learning limits please?  Cheers
|
|
| Top |
|
 |
|
Easty
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Mon Mar 05, 2012 8:47 am |
|
|
| Experienced |
 |
Joined: Thu Jul 22, 2010 6:22 am
Posts: 148
Location: Australia
|
|
Hi,
Can you Please find these values for AZ1G400W i'd really appreciate it!
Maybe these corrections could be the reason it's so hard to dial in your closed loop MAF scale and EL comp's, what do you think?
Do these corrections remain active in open loop?
Regards
Easty
_________________
09 ADM WRX/ 3" Exforce Turbo Back, Hyperflow TMIC, AEM CAI, Perrin Turbo Inlet, TGV Delete, Ported VF-52, Walbro Pump, Hybrid boost control (Grimmspeed EBCS/MBC), SI-Drive Mode Selector (3 pos Rocker Sw)/ Self tuned @ 17 Psi, Last dyno run 206Kw.
|
|
| Top |
|
|
|
td-d
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Mon Mar 05, 2012 10:08 am |
|
|
| Moderator |
Joined: Thu May 20, 2010 4:01 am
Posts: 3117
Location: Johannesburg, South Africa
|
ThrottleHappy - done  Easty, could you PM me your Rom? The one in the stock Roms download keeps on giving me AZ1G101N for some reason...
_________________
He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
|
|
wrxt4cy
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Mon Mar 05, 2012 10:53 am |
|
|
| Experienced |
 |
Joined: Fri Mar 02, 2012 2:09 pm
Posts: 183
Location: DSM, IA :: 2011 STi - Dom3.5XTR - E85
|
|
I was able to define this table in my rom thanks to your instructions.
For Cal ID AE5IA10V the table is 3447c (2011 USDM STi).
Tomorrow I'm going to zero out this table and remove the rear o2 sensor completely to see if the correction goes away. I already idle/cruise slightly rich which I assume is due to being catless. The ECU has always targeted 14.59 - 14.6 after I went catless. It would be awesome to have this correction gone and to be able to keep my wideband installed permanently.
Thanks for your work on this.
|
|
| Top |
|
|
|
td-d
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Mon Mar 05, 2012 11:06 am |
|
|
| Moderator |
Joined: Thu May 20, 2010 4:01 am
Posts: 3117
Location: Johannesburg, South Africa
|
|
Great, glad you got it - report back on the O2 removal - we're all curious!
_________________
He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
|
|
wrxt4cy
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Mon Mar 05, 2012 11:41 am |
|
|
| Experienced |
|
Joined: Fri Mar 02, 2012 2:09 pm
Posts: 183
Location: DSM, IA :: 2011 STi - Dom3.5XTR - E85
|
Me too - I will let everyone know how it turns out.
|
|
| Top |
|
|
|
td-d
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Mon Mar 05, 2012 6:12 pm |
|
|
| Moderator |
Joined: Thu May 20, 2010 4:01 am
Posts: 3117
Location: Johannesburg, South Africa
|
|
Easty - got the rom, check first post.
_________________
He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
|
|
Easty
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Mon Mar 05, 2012 10:12 pm |
|
|
| Experienced |
|
Joined: Thu Jul 22, 2010 6:22 am
Posts: 148
Location: Australia
|
|
Thanks Very Much!! Tested it out today and it all works!
I noticed before i zeroed them out that the last correction was held into open loop this could explain why every time i check my OL Maf Scale its approx. +-2.5%.
After zeroing out the limits AFR seems to be more stable now. I'm not sure if it's my imagination or not but my idle seems smother now to.
It will be interesting to see if this affects economy though it possible won’t as these corrections seem to oscillate about zero.
Cheers!
_________________
09 ADM WRX/ 3" Exforce Turbo Back, Hyperflow TMIC, AEM CAI, Perrin Turbo Inlet, TGV Delete, Ported VF-52, Walbro Pump, Hybrid boost control (Grimmspeed EBCS/MBC), SI-Drive Mode Selector (3 pos Rocker Sw)/ Self tuned @ 17 Psi, Last dyno run 206Kw.
|
|
| Top |
|
|
|
Rich_D
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Wed Mar 07, 2012 1:23 am |
|
|
| Newbie |
Joined: Tue Aug 10, 2010 5:03 am
Posts: 13
|
|
I was wondering if anyone can help me out?
I can't use IDA to save my life so it's probably best if I don't attempt to change anything.
Throttlehappy is helping me out with my tuning, would anyone be able to help me out with changing my rom to zero the rear 02 limits?
|
|
| Top |
|
|
|
throttlehappy
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Wed Mar 07, 2012 2:19 am |
|
|
| Senior Member |
Joined: Sat Feb 12, 2011 7:27 pm
Posts: 2031
Location: Northern NSW
|
Rich_D wrote: I was wondering if anyone can help me out?
I can't use IDA to save my life so it's probably best if I don't attempt to change anything.
Throttlehappy is helping me out with my tuning, would anyone be able to help me out with changing my rom to zero the rear 02 limits? Doing it now Yours is the A8DH200O ROM
|
|
| Top |
|
|
|
td-d
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Wed Mar 07, 2012 2:25 am |
|
|
| Moderator |
Joined: Thu May 20, 2010 4:01 am
Posts: 3117
Location: Johannesburg, South Africa
|
|
Thanks ThrottleHappy - would only get the chance tonight.
_________________
He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
|
|
throttlehappy
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Wed Mar 07, 2012 2:33 am |
|
|
| Senior Member |
Joined: Sat Feb 12, 2011 7:27 pm
Posts: 2031
Location: Northern NSW
|
td-d wrote: ThrottleHappy - done Easty, could you PM me your Rom? The one in the stock Roms download keeps on giving me AZ1G101N for some reason... Much appreciated Just a side note: AZ1GJ500G :31398 on the first post has an extra J in it. Should be AZ1G500G I believe?
|
|
| Top |
|
|
|
Rich_D
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Wed Mar 07, 2012 2:49 am |
|
|
| Newbie |
Joined: Tue Aug 10, 2010 5:03 am
Posts: 13
|
throttlehappy wrote: td-d wrote: ThrottleHappy - done Easty, could you PM me your Rom? The one in the stock Roms download keeps on giving me AZ1G101N for some reason... Much appreciated Just a side note: AZ1GJ500G :31398 on the first post has an extra J in it. Should be AZ1G500G I believe? You are both the most upstanding gentlemen
|
|
| Top |
|
|
|
2bfi
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Wed Mar 07, 2012 7:29 am |
|
|
| RomRaider Donator |
Joined: Fri Dec 25, 2009 8:46 am
Posts: 93
|
throttlehappy wrote: td-d wrote: ThrottleHappy - done Easty, could you PM me your Rom? The one in the stock Roms download keeps on giving me AZ1G101N for some reason... Much appreciated Just a side note: AZ1GJ500G :31398 on the first post has an extra J in it. Should be AZ1G500G I believe? Nope, its AZ1J500G '11 EDM STI Attachment: ecuflash.jpg
You do not have the required permissions to view the files attached to this post.
|
|
| Top |
|
|
|
td-d
|
Post subject: Re: AF#3 (Rear O2 sensor) correction limits Posted: Wed Mar 07, 2012 9:40 am |
|
|
| Moderator |
Joined: Thu May 20, 2010 4:01 am
Posts: 3117
Location: Johannesburg, South Africa
|
|
Fixed, thanks for pointing that out.
_________________
He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
