|
RomRaider
Documentation
Community
Developers
|
| Author |
Message |
|
wrxt4cy
|
Post subject: Request: Cruise control speed limiting tables  Posted: Mon May 06, 2013 12:41 pm |
|
 |
| Experienced |
 |
Joined: Fri Mar 02, 2012 2:09 pm
Posts: 183
Location: DSM, IA :: 2011 STi - Dom3.5XTR - E85
|
This has been brought up in the past but its an old thread: http://www.romraider.com/forum/viewtopic.php?f=15&t=1454lClearly there isn't a lot of interest in people wanting to be able to use their cruise control over 89 mph but I've got a couple friends that frequently travel to Texas where some highways have 85 mph speed limits and they'd like to be able to set the cruise control a bit over the limit of 89 mph. The "other" popular tuning solution has this defined but these guys are running OS tunes. If anyone is interesting in digging this out I would appreciate it and be willing to test. The roms I need it for are: AE5I910V AE5K611V Thanks!
|
|
| Top |
|
 |
|
td-d
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Mon May 06, 2013 1:03 pm |
|
|
| Moderator |
Joined: Thu May 20, 2010 4:01 am
Posts: 3117
Location: Johannesburg, South Africa
|
|
Can do - I've dug them out before (for AZ1G101N). Give me a couple of days till I'm back in town.
_________________
He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
|
|
Sasha_A80
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Mon May 06, 2013 1:14 pm |
|
|
| Senior Member |
Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1615
Location: Moscow, Russia
|
|
Hitachi ecu has CruiseCancel < CruiseEnableMin < CruiseEnableMax.
Usually 32\37\250 kph for Europe, 32\35\105 for Japan.
|
|
| Top |
|
|
|
wrxt4cy
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Mon May 06, 2013 2:49 pm |
|
|
| Experienced |
|
Joined: Fri Mar 02, 2012 2:09 pm
Posts: 183
Location: DSM, IA :: 2011 STi - Dom3.5XTR - E85
|
td-d wrote: Can do - I've dug them out before (for AZ1G101N). Give me a couple of days till I'm back in town. Thanks!
|
|
| Top |
|
|
|
Easty
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Mon May 06, 2013 8:01 pm |
|
|
| Experienced |
 |
Joined: Thu Jul 22, 2010 6:22 am
Posts: 148
Location: Australia
|
AE5K611V Attachment: Untitled.png AE5I910V Attachment: Untitled1.png
You do not have the required permissions to view the files attached to this post.
_________________
09 ADM WRX/ 3" Exforce Turbo Back, Hyperflow TMIC, AEM CAI, Perrin Turbo Inlet, TGV Delete, Ported VF-52, Walbro Pump, Hybrid boost control (Grimmspeed EBCS/MBC), SI-Drive Mode Selector (3 pos Rocker Sw)/ Self tuned @ 17 Psi, Last dyno run 206Kw.
|
|
| Top |
|
|
|
Sasha_A80
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Tue May 07, 2013 1:28 am |
|
|
| Senior Member |
Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1615
Location: Moscow, Russia
|
|
It look like this is not as simple as an apple pie..
There should be CruiseCancel/CruiseEnableMin/CruiseEnableMax
All those values are looking to be related to CruiseControl:
EP5D202N AUDM / also sold in Russia
ROM:000C1CDC flt_C1CDC: .float 3.5099998e1 ; DATA XREF: ROM:off_1BE7C
ROM:000C1CE0 flt_C1CE0: .float 2.5e2 ; DATA XREF: ROM:off_1BE84
ROM:000C1CE4 flt_C1CE4: .float 3.0e1 ; DATA XREF: ROM:off_1BE88
ROM:000C1CE8 flt_C1CE8: .float 2.55e2 ; DATA XREF: ROM:off_1BE8C
ROM:000C1CEC flt_C1CEC: .float 0.0 ; DATA XREF: ROM:off_1BE90
ROM:000C1CF0 CruiseEnableMin1_flt_C1CF0:.float 3.5099998e1
ROM:000C1CF0 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC1C
ROM:000C1CF4 CruiseEnableMax1_flt_C1CF4:.float 2.5e2 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC24
ROM:000C1CF8 flt_C1CF8: .float 0.0 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC2C
ROM:000C1CFC CruiseEnableMax1_flt_C1CFC:.float 4.5e1 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC30
ROM:000C1D00 flt_C1D00: .float 3.0e1 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC34
ROM:000C1D04 flt_C1D04: .float 2.55e2 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC38
ROM:000C1D08 flt_C1D08: .float 0.0 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC28
ROM:000C1D0C flt_C1D0C: .float 3.5099998e1 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC3C
ROM:000C1D10 flt_C1D10: .float 2.5e2 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC40
ROM:000C1D14 flt_C1D14: .float 3.0e1 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC44
ROM:000C1D18 flt_C1D18: .float 2.55e2 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC48
ROM:000C1D1C flt_C1D1C: .float 0.0 ; DATA XREF: cruiseRanges_sub_1BB44:off_1BC4C
|
|
| Top |
|
|
|
Sasha_A80
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Tue May 07, 2013 2:26 am |
|
|
| Senior Member |
Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1615
Location: Moscow, Russia
|
|
A8DH100F 4242584106
Forester MY06 EDM (MT choise hard coded inside the subroutine)
ROM:000C191C CruiseEnableMinMT_flt_C191C:.float 3.7e1 ; DATA XREF: ROM:off_1BB34
ROM:000C1920 CruiseEnableMinAT_flt_C1920:.float 4.0e1 ; DATA XREF: ROM:off_1BB2C
ROM:000C1924 CruiseEnableMaxMT_flt_C1924:.float 2.5e2 ; DATA XREF: ROM:off_1BB38
ROM:000C1928 CruiseEnableMaxAT_flt_C1928:.float 1.1e2 ; DATA XREF: ROM:off_1BB30
Probably CruiseCansel settings
ROM:000C192C flt_C192C: .float 2.0e1 ; DATA XREF: ROM:off_1BB48
ROM:000C1930 _6400_rpm_flt_C1930:.float 6.4e3 ; DATA XREF: ROM:off_1BDB8 ; ROM:off_1DE80; sub_1DEA8:off_1E0E0; sub_1E17A:off_1E380
ROM:000C1934 flt_C1934: .float 2.0e2 ; DATA XREF: ROM:off_1BDBC; ROM:off_1DE84; sub_1DEA8:off_1E0E4; sub_1E17A:off_1E384
ROM:000C1938 flt_C1938: .float 3.2e1 ; DATA XREF: ROM:off_1BDC0; ROM:off_1DE90; sub_1DEA8:off_1E0F0; sub_1E17A:off_1E390
ROM:000C193C flt_C193C: .float 2.55e2 ; DATA XREF: ROM:off_1BDC4; ROM:off_1C788; ROM:off_1DE7C; sub_1DEA8:off_1E0DC; sub_1E17A:off_1E37C
|
|
| Top |
|
|
|
wrxt4cy
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Tue May 07, 2013 10:48 am |
|
|
| Experienced |
|
Joined: Fri Mar 02, 2012 2:09 pm
Posts: 183
Location: DSM, IA :: 2011 STi - Dom3.5XTR - E85
|
Easty wrote: AE5K611V Attachment: Untitled.png AE5I910V Attachment: Untitled1.png Thanks! What is the difference between two sets of high and low values? Are they used under different conditions such as cruise/non-cruise? I assume I should just raise both, right? Does this looks right: Code: BASE: <table name="Cruise control speed limiting high A" category="ALPHA cruise control speed limiting" type="2D" level="4" scaling="VehicleSpeed(MPH)"> <description>cruise control high limit</description> <table name="X" type="Static Y Axis" elements="1"> <data>Disable above</data> </table> </table> <table name="Cruise control speed limiting high B" category="ALPHA cruise control speed limiting" type="2D" level="4" scaling="VehicleSpeed(MPH)"> <description>cruise control high limit</description> <table name="X" type="Static Y Axis" elements="1"> <data>Disable above</data> </table> </table> AE5K611V: <table name="Cruise control speed limiting high A" address="C1F84"/> <table name="Cruise control speed limiting high B" address="C1F88"/>
|
|
| Top |
|
|
|
Easty
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Tue May 07, 2013 7:53 pm |
|
|
| Experienced |
|
Joined: Thu Jul 22, 2010 6:22 am
Posts: 148
Location: Australia
|
|
There's a switch that determines which set of Max/Min limits are used.
I don't know what the switch value is and where it is created at this stage but I can't see any reason why you cant alter both limits.
Your deff's look good but I'm not a 100% on ECU flash deff's, no harm in trying them though.
_________________
09 ADM WRX/ 3" Exforce Turbo Back, Hyperflow TMIC, AEM CAI, Perrin Turbo Inlet, TGV Delete, Ported VF-52, Walbro Pump, Hybrid boost control (Grimmspeed EBCS/MBC), SI-Drive Mode Selector (3 pos Rocker Sw)/ Self tuned @ 17 Psi, Last dyno run 206Kw.
|
|
| Top |
|
|
|
Easty
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Tue May 07, 2013 8:03 pm |
|
|
| Experienced |
|
Joined: Thu Jul 22, 2010 6:22 am
Posts: 148
Location: Australia
|
You do not have the required permissions to view the files attached to this post.
_________________
09 ADM WRX/ 3" Exforce Turbo Back, Hyperflow TMIC, AEM CAI, Perrin Turbo Inlet, TGV Delete, Ported VF-52, Walbro Pump, Hybrid boost control (Grimmspeed EBCS/MBC), SI-Drive Mode Selector (3 pos Rocker Sw)/ Self tuned @ 17 Psi, Last dyno run 206Kw.
|
|
| Top |
|
|
|
Sasha_A80
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Tue May 07, 2013 11:27 pm |
|
|
| Senior Member |
Joined: Mon Jan 19, 2009 2:31 pm
Posts: 1615
Location: Moscow, Russia
|
Easty wrote: There's a switch that determines which set of Max/Min limits are used.
I don't know what the switch value is and where it is created at this stage but I can't see any reason why you cant alter both limits.
AT\MT set is chosen according to ATident pin value ( AT if disconnected\ MT if grounded, software switch 1\0 ) or hardcoded just before CruiseRelatedValues are used in AT and MT specific ecu's where AT ident pin is not impemented. Accordingly the first values are for AT, the second ones are for MT transmission in your example. More recent ecu uses additional switches.
|
|
| Top |
|
|
|
td-d
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Wed May 08, 2013 3:30 pm |
|
|
| Moderator |
Joined: Thu May 20, 2010 4:01 am
Posts: 3117
Location: Johannesburg, South Africa
|
Thanks Easty, pipped to the post 
_________________
He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
|
|
Easty
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Wed May 08, 2013 6:26 pm |
|
|
| Experienced |
|
Joined: Thu Jul 22, 2010 6:22 am
Posts: 148
Location: Australia
|
|
No Worries Mate!
_________________
09 ADM WRX/ 3" Exforce Turbo Back, Hyperflow TMIC, AEM CAI, Perrin Turbo Inlet, TGV Delete, Ported VF-52, Walbro Pump, Hybrid boost control (Grimmspeed EBCS/MBC), SI-Drive Mode Selector (3 pos Rocker Sw)/ Self tuned @ 17 Psi, Last dyno run 206Kw.
|
|
| Top |
|
|
|
Mahis
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Tue Aug 20, 2013 10:30 am |
|
|
| Newbie |
Joined: Tue Aug 20, 2013 6:22 am
Posts: 1
|
Hi guys, I have -05 JDM Legacy GT. As it has been transferred from Japan to Europe, I would like to have this same functionality (cruise more than 105 kph) to my car as well (A2ZJ600B). Any chance of enabling this setup to my car as well ? I can deliver the ROM if needed for example via e-mail. Br, Pete I believe this to be match to my ecu rom. http://www.romraider.com/forum/download/file.php?id=928
|
|
| Top |
|
|
|
rbimdxe
|
Post subject: Re: Request: Cruise control speed limiting tables Posted: Fri Jan 16, 2015 9:00 pm |
|
|
| Experienced |
Joined: Fri Jan 22, 2010 10:42 am
Posts: 192
|
|
Bump, anyone able to find these for A8DK100V?
Thanks
_________________
Had: MY07 ADM STI (A8DK100V)
~300kw atw on e-flex, self tuned.
Now: MY09 Foz XTP (AZ1G101M)
~250kw atw on E70 (TD06SL2-18G), self tuned.
|
|
| Top |
|
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
