RomRaider

I have an AEM Uego wideband and currently have it hooked up with a serial connection. With my SD Logger I can sucessfully log with my 0-5v output from the wideband wired directly to one of the OBDII pins and then I scale this voltage value in the logger.txt file to give me the correct AFR. Is there something set up in Romraider Logger with this as well?

I really would like to have less wires when logging and log do everything through the Tactrix. If anyone has successfully logged their wideband as described above in Romraider Logger, help would be appreciated.

It's not possible right now. There's no communications interface between the Logger and the Tactrix serial port input.

Hopefully this gets some views still.

What about using one of the TGV 0-5v inputs?

Ie, with a TGV delete there are now two spare inputs - could the RR definition be rewritten from showing 0-5v=TGVLeftAngle to show 0-5v=10.94-22.4AFR? Ie, use the scaling ffrom Innovate/AEM/etc and insert it directly into the main definition (logging def) so that AFR logging can be dine without needing to use the serial-to-usb adapter, and without plugging in another USB cable?

I think its been talked about but haven't seen it done.

Or if someone could point me in the direction of where it has been done so I can follow up, that'd be great.

Cheers

Edit; derp - found it and got it wired up now. - viewtopic.php?t=6430

were you able to log the tgv sensor voltage with the carberry rom?

I don't use carberry as I have a 32bit