RomRaider

Donations are welcome!

The EcuFlash def for this Rom is partially completed - there are some tables that I'm not 100% sure about, as the logic was different from other roms I've done - so let me know of any errors.

Store the file in directory: \Program Files\OpenECU\EcuFlash\rommetadata\subaru\Legacy 3.6\ of your EcuFlash installation (you may need to create this sub folder).

Updated EcuFlash 32BITBASE def is needed for the above def.
Store the file in directory: \Program Files\OpenECU\EcuFlash\rommetadata\subaru\Bases

has anyone unlocked/defined the rest of the tables on this? i have used this and tuner was able to grab amazing gains but he wants the missing tables. I must say it is a torque monster!

Hey Oren

Try using DE5I500M as a template as they are very close

CL/OL Transition Tables are WAY off

Tip-In Enrichment B is off

I'm attaching an EcuFlash definition with few corrections, plus adding some tables. Not sure of the origin of the updated definition as it was sent to me by a customer, but I verified that the corrections seem valid.

"Manifold Pressure Sensor Limits (CEL)" address should be d8c20
"Manifold Pressure Sensor CEL Delays" address should be d8bdb
"Throttle Tip-in Enrichment A" number of elements should be 7, not 5
"Throttle Tip-in Enrichment B" number of elements should be 7, not 5, and axis address should be ce614
"Base Timing..." tables all have some changes to the axes

Thanks Mike - damn, this must be one of the first definitions I did, when I was still getting my head around IDA, over 2 years old!

I spend too much time on here, I think

Maybe, but don't go anywhere!

<table name="Manifold Pressure Sensor Scaling" address="d8c5c">
<table name="MPS Voltage to Manifold Absolute Pressure">
<data>Multiplier (psia/v)</data>
<data>Offset (psia)</data>
</table>
</table>

<table name="Atmospheric Pressure Sensor Scaling" address="c00e0">
</table>

Note the MAP sensor scaling in the existing definition was mixed up with Atmospheric Pressure Sensor, they have the same values, but one is inverted values, unlike previous Legacy models