Learning View v1.0 RC3

dschultz · **Posted:** Sat Aug 23, 2014 10:56 am

What car are you trying to read?
Openport2 doesn't have COM ports.

Manaz wrote:

I'm trying to use Learning View on Windows 8.1. I get an empty "port" field, and thus can't connect to the car:

Manaz · **Joined:** Sat Aug 23, 2014 2:35 am **Posts:** 2

dschultz wrote:

What car are you trying to read?
Openport2 doesn't have COM ports.

MY09 Liberty (known as Legacy outside of Australia) GT Spec.B. Last of the 4Gen cars.

It worked fine before with Win 7, same car, same hardware. Definitely using the USB2 port and not the USB3 port on the laptop (the USB3 port is blue). I've tried running as administrator, and running it under Windows 7 compatibility mode, neither were successful unfortunately.

I didn't realise it didn't come up as a COM port, that at least explains that side of things.

dschultz · **Posted:** Sun Aug 24, 2014 10:30 pm

Are you able to read the ECU with a different OBD scanner?
At the moment it appears as if the ECU is not responding, bad connection?

benjim · **Joined:** Sun Apr 12, 2009 12:43 pm **Posts:** 4

Is there any way to update this for support of the 2015 STI ECU ID of 8B12784007?

If its not publicly updated is the source available for modification?

Thanks.

dschultz · **Posted:** Sun Sep 21, 2014 9:27 pm

Try this:
viewtopic.php?t=9745

jlhk · **Joined:** Wed Aug 29, 2012 6:40 pm **Posts:** 24

Hi，

Could you please help to make learning view support the following ecu map？

AZ1L100X
Thank you very much in advance.

dschultz · **Posted:** Wed Oct 15, 2014 9:24 am

Try this:
viewtopic.php?t=9745

jlhk · **Joined:** Wed Aug 29, 2012 6:40 pm **Posts:** 24

dschultz wrote:

Try this:
viewtopic.php?t=9745

Thank you so much. Will try soon and report progress.

jlhk · **Joined:** Wed Aug 29, 2012 6:40 pm **Posts:** 24

dschultz wrote:

Try this:
viewtopic.php?t=9745

Thank you so much. Will try soon and report progress.

ntippet · **Joined:** Wed Feb 27, 2013 9:13 am **Posts:** 43

Is there a current list of the supported ECU's for RC3?
There is a note stating 410 ECU's are supported, but no current list stating which.

throttlehappy · **Posted:** Fri Jan 30, 2015 7:10 am

ntippet wrote:

Is there a current list of the supported ECU's for RC3?
There is a note stating 410 ECU's are supported, but no current list stating which.

Simply, nothing after the date that Merchgod posted the latest version so 2012 onwards is basically out. Few others are missing, some are corrupted(H6's mostly) but basically, if it was defined prior to Merchgod posting RC3, then its likely in

RomRaider Learning View functionality takes over where LV itself was left behind

ntippet · **Joined:** Wed Feb 27, 2013 9:13 am **Posts:** 43

Oh nice, I didn't know Romraider had that function now as well.

So does Learning View throw an error if that ECU is not supported?
Also how do you know if an H6 is corrupted?
09' Tribeca is the vehicle I have in question.

I tried Learning View and it appears that everything is working, just wondering if the values are good.

Lassiv · **Joined:** Wed Mar 04, 2015 4:13 pm **Posts:** 7

Hi

Not see any info in first post, do this Learning view support Tactrix OpenPort2? Seems that work but my ecu is not supported.

Code:

LearningView_LOG.txt

﻿[13:37:46.8783684] Learning View version 1.0 RC3

[13:37:49.7615110] PassThruOpen returned 0 and DeviceID 1
[13:37:49.7705174] PassThruReadVersion returned 0
[13:37:49.7805236] Device firmware version: 1.15.4340
[13:37:49.7878081] DLL version: 1.01.4358 Oct 10 2014 03:47:45
[13:37:49.7878081] API version: 04.04
[13:37:49.8034377] PassThruConnect returned 0 and ChannelID 3
[13:37:49.8190634] PassThruStartMsgFilter returned 0
[13:37:49.8503134] ECU Init
[13:37:49.8971913] PassThruWriteMsgs returned 0
[13:37:49.9284520] WRITE 6 bytes: 80 10 F0 01 BF 40 
[13:37:49.9598632] PassThruReadMsgs returned 0
[13:37:49.9755926] READ 0 bytes
[13:37:50.0541852] PassThruReadMsgs returned 0
[13:37:50.0856494] READ 62 bytes: 80 F0 10 39 FF A2 10 0F 2F 04 50 53 06 73 FA CB 84 0A 03 FE A8 00 00 00 61 CE D4 FD B0 00 00 0F 20 00 00 00 00 80 DC 00 00 5D 1E 30 C0 F0 22 00 FC 40 FB 00 E1 00 00 00 00 00 00 C1 00 55 
[13:37:56.1161374] ECU ID of 2F04505306 not found: 
[13:37:56.1473843] PassThruDisconnect returned 0
[13:37:56.1630100] PassThruClose returned 0

[13:37:59.7356663] PassThruOpen returned 0 and DeviceID 2
[13:37:59.7667711] PassThruReadVersion returned 0
[13:37:59.7825274] Device firmware version: 1.15.4340
[13:37:59.7980164] DLL version: 1.01.4358 Oct 10 2014 03:47:45
[13:37:59.8292732] API version: 04.04
[13:37:59.8606668] PassThruConnect returned 0 and ChannelID 4
[13:37:59.8762979] PassThruStartMsgFilter returned 0
[13:37:59.8919059] ECU Init
[13:37:59.9231697] PassThruWriteMsgs returned 0
[13:37:59.9542806] WRITE 6 bytes: 80 10 F0 01 BF 40 
[13:38:00.0015180] PassThruReadMsgs returned 0
[13:38:00.0167843] READ 0 bytes
[13:38:00.0796520] PassThruReadMsgs returned 0
[13:38:00.1105364] READ 62 bytes: 80 F0 10 39 FF A2 10 0F 2F 04 50 53 06 73 FA CB 84 0A 03 FE A8 00 00 00 61 CE D4 FD B0 00 00 0F 20 00 00 00 00 80 DC 00 00 5D 1E 30 C0 F0 22 00 FC 40 FB 00 E1 00 00 00 00 00 00 C1 00 55 
[13:38:01.1168686] ECU ID of 2F04505306 not found: 
[13:38:01.1481216] PassThruDisconnect returned 0
[13:38:02.1856092] PassThruClose returned 0

My ecu is this model (Legacy GT -05 AT A2ZJC00A) viewtopic.php?f=34&t=11174

Any ideas how i get that work with learning view? Big thanks to all who can help.

dschultz · **Posted:** Fri Mar 06, 2015 1:07 pm

dschultz wrote:

Try this:
viewtopic.php?t=9745

RomRaider

Forum rules

Learning View v1.0 RC3

Who is online