RomRaider

Nevermind. Found it.

There's a calc error in the Metric to imperial MAP offset.

You punch in "-8.00542278" PSIA which should calculate to -0.551954736 BARA
Instead it gives you -0.390999816 BARA

Just a heads up

any chance on getting 3.8.5 for ecuflash?

Here ya go. I believe it was one of these two.

Both are used. Replace existing CarBerry Base with the 3.8.5 base and replace CarBerry STi folder with the 3.8.5 STi. There are a few changes but most 3.6.5 up versions can still be opened to transfer (copy/paste) table values

Ok... So I have an original car berry rom on my car... I tuned it about 2 years ago.. Now I can't open the rom in ecu flash. I have no idea what version it is lol. Anyone wanna take a crack at it for me?

can you post the rom?

Also don't use the ^^^ definitions.. Found that it screws up the MAF scaling and limits to 300gs again.. Does some other weird things too with MAF.

I'll post it up in a few when I get into the shop. Thanks Ken

here ya go fellers.

I can open your rom with the latest ECUflash carberry definitions - as I recall from the carberry thread the idea is you open your old rom and open a new blank carberry rom then transfer your tables into the new rom and you should be good to go.

Got it going again.. Dunno what happened with my defs but all is well again

No match for p0458 and p0459.

Here are my modified definitions that fix the no match errors for the CELs and Defrost Button Logic. I also added in Engine Load smoothing from the 3.8.6 RR defs. Also fixed some ocd bits like "Disabled" or "Enabled" being capitalized in some tables . If you use ecuflash for the majority of your tuning like me, these might be useful for you.

Cant read this with the new deffs