Trying to find MIN IPW setting

04ssti · **Joined:** Sat Dec 25, 2010 10:16 pm **Posts:** 71

dschultz wrote:

04ssti wrote:

Hey Merp could you pull the code for A2ZJ710j as well?

Thank you

Code:

ROM:0005B8C8 Fuel_Injector_Pulse_Width_Min:.float 570.0

ROM:000545F0 Table_Low_PulseWidth_Fuel_Injector_Compensation:.data.w 8
ROM:000545F4 00 05 C1 3C                 .data.l flt_5C13C
ROM:000545F8 00 05 C1 5C                 .data.l byte_5C15C      ; = 1.117
ROM:000545FC 3C 00 00 00                 .float 0.0078125
ROM:00054600 00 00 00 00                 .float 0.0

Perfect. Thank you! If I have any troubles getting the 2nd table up I'll reply. I got the first table (5b8c8) already

Does my rom have the CEL flash for FBKC as well? I found the addresses for them but when I change the numbers in the tables it throws the SD blending table's header out of whack like the addresses are conflicting or overlapping.

04ssti · **Joined:** Sat Dec 25, 2010 10:16 pm **Posts:** 71

Figured it out! Thanks

How about CEL flash for FBKC?

kenwen · **Joined:** Sat Apr 20, 2024 10:40 pm **Posts:** 44

I have defined the Minimum Injector Pulse width for rom id A2ZJE11J.

Add this code in your definition :

<table name="Minimum Injector Pulsewidth" category="Min Inj Pulse" address="c5ba4" type="2D" level="2" scaling="BasePulseWidth(ms)">
<description> Changing this to a lower value when injectors are bigger than 1000cc can help with rich or lean idle conditions. </description>
<table type="Static Y Axis" elements="1">
<data>Minimum IPW</data>
</table>
</table>

RomRaider

Forum rules

Trying to find MIN IPW setting

Who is online