RomRaider Logo

RomRaider

Open Source ECU Tools
 FAQ •  Register •  Login 

RomRaider

Documentation

Community

Developers

It is currently Sat Feb 21, 2026 11:27 am

All times are UTC





Post new topic Reply to topic  [ 19 posts ]  Go to page Previous  1, 2
Author Message
 Post subject: Re: CAN Messages and the 5EAT
PostPosted: Mon Jun 29, 2015 6:19 pm 
Offline
Experienced

Joined: Wed Mar 29, 2006 3:36 am
Posts: 409
Location: Barbados
Unknow maps. Functions & Operations unknow at this point in time.

<map name="Calculated Engine Torque (ECO Mode) (Accelerator vs RPM)" type="3" class="Transmission">
<rows count="16" offset="#62C9C" storagetype="float" format="%.f"/>
<cols count="18" offset="#62C54" storagetype="float" func_2val="[value]" func_val2="[value]" format="%.f"/>
<data offset="#62CDC" storagetype="uint16" func_2val="[value]*0.0078125" func_val2="[value]/0.0078125" format="%.f"/>
</map>

<map name="Calculated Engine Torque (ECO Mode) (MAP vs RPM)" type="3" class="Transmission">
<rows count="14" offset="#623FC" storagetype="float" func_2val="[x]/7000"/>
<cols count="16" offset="#623BC" storagetype="float" func_2val="[value]" func_val2="[value]" format="%.f"/>
<data offset="#62434" storagetype="uint16" func_2val="[value]*0.0078125" func_val2="[value]/0.0078125" format="%.f"/>
</map>

<map name="Calculated Engine Torque (Power Mode) (MAP vs RPM)" type="3" class="Transmission">
<rows count="14" offset="#62634" storagetype="float" func_2val="[x]/7000"/>
<cols count="16" offset="#625F4" storagetype="float" func_2val="[value]" func_val2="[value]" format="%.f"/>
<data offset="#6266C" storagetype="uint16" func_2val="[value]*0.0078125" func_val2="[value]/0.0078125" format="%.f"/>
</map>

<map name="Some Map (ECO Mode) (Throttle vs RPM)" type="3" class="Transmission">
<rows count="13" offset="#6286C" storagetype="float" format="%.f"/>
<cols count="16" offset="#6282C" storagetype="float" func_2val="[value]" func_val2="[value]" format="%.f"/>
<data offset="#628A0" storagetype="uint16" func_2val="[value]*0.0078125" func_val2="[value]/0.0078125" format="%.f"/>
</map>

<map name="Some Map (Power Mode) (Throttle vs RPM)" type="3" class="Transmission">
<rows count="13" offset="#62A80" storagetype="float" format="%.f"/>
<cols count="16" offset="#62A40" storagetype="float" func_2val="[value]" func_val2="[value]" format="%.f"/>
<data offset="#62AB4" storagetype="uint16" func_2val="[value]*0.0078125" func_val2="[value]/0.0078125" format="%.f"/>
</map>

Know Trq Req maps below.
<map name="Calculated Engine Torque (Power Mode) (Accelerator vs RPM)" type="3" class="Transmission">
<rows count="16" offset="#62F64" storagetype="float" format="%.f"/>
<cols count="18" offset="#62F1C" storagetype="float" func_2val="[value]" func_val2="[value]" format="%.f"/>
<data offset="#62FA4" storagetype="uint16" func_2val="[value]*0.0078125" func_val2="[value]/0.0078125" format="%.f"/>
</map>

<map name="Calculated Engine Torque (ECO Mode) (Eng. Load vs RPM)" type="3" class="Transmission">
<rows count="16" offset="#63214" storagetype="float" format="%.f"/>
<cols count="12" offset="#631E4" storagetype="float" func_2val="[value]/7000" func_val2="[value]*7000"/>
<data offset="#63254" storagetype="uint16" func_2val="[value]*0.0078125" func_val2="[value]/0.0078125" format="%.f"/>
</map>

<map name="Calculated Engine Torque (Power Mode) (Eng. Load vs RPM)" type="3" class="Transmission">
<rows count="16" offset="#63404" storagetype="float" format="%.f"/>
<cols count="12" offset="#633D4" storagetype="float" func_2val="[value]/7000" func_val2="[value]*7000"/>
<data offset="#63444" storagetype="uint16" func_2val="[value]*0.0078125" func_val2="[value]/0.0078125" format="%.f"/>
</map>


You do not have the required permissions to view the files attached to this post.

_________________
West_Minist

Subaru Expert Tuner
Subaru Diagnostics & Logging Reviewer
Engine Management Systems Tuner

info@xtremeracingtuning.com

Facebook | [url=http://xtremeracingtuning.com/2017/07/16/remote-tuning/}Remote Tuning[/url]

Viciously Tuned, Driven Hard


Top
 Profile  
 
 Post subject: Re: CAN Messages and the 5EAT
PostPosted: Tue Jun 30, 2015 12:58 pm 
Offline
RomRaider Developer

Joined: Thu May 21, 2009 1:49 am
Posts: 7323
Location: Canada eh!
FYI, here's a def of all the tables in their natural units.
Torque is most likely listed in N⋅m.


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
 Post subject: Re: CAN Messages and the 5EAT
PostPosted: Tue Aug 11, 2015 6:06 pm 
Offline
Experienced

Joined: Wed Mar 29, 2006 3:36 am
Posts: 409
Location: Barbados
Hey I didn't get a notification. I will import it into ecuedit and see.

That def has quite a few tables. woow.

_________________
West_Minist

Subaru Expert Tuner
Subaru Diagnostics & Logging Reviewer
Engine Management Systems Tuner

info@xtremeracingtuning.com

Facebook | [url=http://xtremeracingtuning.com/2017/07/16/remote-tuning/}Remote Tuning[/url]

Viciously Tuned, Driven Hard


Top
 Profile  
 
 Post subject: Re: CAN Messages and the 5EAT
PostPosted: Tue Aug 11, 2015 7:50 pm 
Offline
Experienced

Joined: Wed Mar 29, 2006 3:36 am
Posts: 409
Location: Barbados
Some maps seems to control the Centre Diff, but thats expected from the TCU.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 19 posts ]  Go to page Previous  1, 2

All times are UTC


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
Style based on FI Subsilver by phpBBservice.nl