|
RomRaider
Documentation
Community
Developers
|
| Author |
Message |
|
Shadow27
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value  Posted: Sun Oct 18, 2015 11:29 am |
|
 |
| Newbie |
Joined: Sun Oct 20, 2013 9:30 am
Posts: 7
|
|
Could anyone help out with the address for AZ1G900C please.
|
|
| Top |
|
 |
|
throttlehappy
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Mon Oct 19, 2015 8:58 am |
|
|
| Senior Member |
Joined: Sat Feb 12, 2011 11:27 pm
Posts: 2032
Location: Northern NSW
|
Shadow27 wrote: Could anyone help out with the address for AZ1G900C please. AZ1G900C 84FFC
|
|
| Top |
|
|
|
throttlehappy
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Mon Oct 19, 2015 9:05 am |
|
|
| Senior Member |
Joined: Sat Feb 12, 2011 11:27 pm
Posts: 2032
Location: Northern NSW
|
throttlehappy wrote: AZ1G101M: 850AC Also confirming same value for AZ1G101N td-d wrote: AZ1G900C
84FFC Phew, I dug that out myself and glad to see I had it right haha
|
|
| Top |
|
|
|
Shadow27
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Mon Oct 19, 2015 9:36 am |
|
|
| Newbie |
Joined: Sun Oct 20, 2013 9:30 am
Posts: 7
|
|
Thank you again good sir.
|
|
| Top |
|
|
|
bencheng0508
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Mon Mar 14, 2016 7:08 am |
|
|
| Newbie |
Joined: Sat Mar 12, 2016 7:42 am
Posts: 1
|
|
AZ1G900P
AZ1E400U
need address
many thanks..
|
|
| Top |
|
|
|
justune1
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Mon Mar 28, 2016 3:09 pm |
|
|
| Newbie |
Joined: Sat Mar 26, 2011 2:52 pm
Posts: 34
|
td-d wrote: justune1 wrote: Can You help me with location for AE5F301C please? 8982C thanks~~any chance for location of AE5I500G~~
|
|
| Top |
|
|
|
td-d
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Mon Mar 28, 2016 7:41 pm |
|
|
| Moderator |
Joined: Thu May 20, 2010 8:01 am
Posts: 3117
Location: Johannesburg, South Africa
|
justune1 wrote: td-d wrote: justune1 wrote: Can You help me with location for AE5F301C please? 8982C thanks~~any chance for location of AE5I500G~~ 89A28
_________________
He who dies with the most gadgets wins.
Please do not PM me - use the email option.
|
|
| Top |
|
|
|
Sambo88
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Fri Aug 04, 2017 11:17 pm |
|
|
| Newbie |
 |
Joined: Tue Jun 09, 2015 7:15 am
Posts: 79
Location: Brisbane, Australia
|
|
Am I missing something here? all I have is 0.00000000000
AZ1G101M - 850AC
| Attachments: |
Capture.PNG [ 33.17 KiB | Viewed 4379 times ]
|
_________________
09 audm wrx - merp full sd mode - running edm forester rom AZ1G101M
|
|
| Top |
|
|
|
The Lorax
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Sat Aug 05, 2017 1:46 am |
|
|
| RomRaider Donator |
Joined: Tue Nov 04, 2014 11:51 am
Posts: 219
|
Sambo88 wrote: Am I missing something here? all I have is 0.00000000000
AZ1G101M - 850AC Interesting - must have been changed at some point in your rom's history by someone.....? Just had a look at stock & patched version I have; value is 0.000061035156 (same address - 850AC, multiplier is same as many other 32bit roms of same era)
|
|
| Top |
|
|
|
Sambo88
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Sat Aug 05, 2017 2:30 am |
|
|
| Newbie |
|
Joined: Tue Jun 09, 2015 7:15 am
Posts: 79
Location: Brisbane, Australia
|
The Lorax wrote: Sambo88 wrote: Am I missing something here? all I have is 0.00000000000
AZ1G101M - 850AC Interesting - must have been changed at some point in your rom's history by someone.....? Just had a look at stock & patched version I have; value is 0.000061035156 (same address - 850AC, multiplier is same as many other 32bit roms of same era) do I have to do anything to the 32bit base file? I just tried the original factory rom and its doing the same thing.  Just to confirm I am adding this to my def file: Code: <table type="2D" name="Engine Load Limit B Maximum (RPM) - Multiplier" category="Mass Airflow / Engine Load" storagetype="float" endian="big" sizey="1" userlevel="4" storageaddress="0x850AC"> <scaling units="multiplier" expression="x" to_byte="x" format="0.000000000000" fineincrement="0" coarseincrement="0" /> <table type="Static Y Axis" name="" sizey="1"> <data>Engine Load Limit B Maximum (RPM) - Multiplier</data> </table> <description>Change this value to change the maximum of the Engine Load Limit B Maximum (RPM) table from it's nominal value. By setting this field to twice (x2) of it's nominal value you will increase the cap of the Engine Load Limit B Maximum (RPM) to double it's nomial value.</description> </table>
_________________
09 audm wrx - merp full sd mode - running edm forester rom AZ1G101M
|
|
| Top |
|
|
|
The Lorax
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Sat Aug 05, 2017 9:08 am |
|
|
| RomRaider Donator |
Joined: Tue Nov 04, 2014 11:51 am
Posts: 219
|
|
Honestly, don't tend to use romraider, find the defs unwieldy...... but what you have there looks about right. However, I'm sure someone can correct me if I'm wrong.
Anyhow......
The problem is that your multiplier value in your rom file is = 10, ie off the charts (perhaps this value is too large to display with the romraider defs). Initially when I loaded it into ECUFlash, your rom wouldn't even display the 'Engine Load Limit B Maximum (RPM) - Multiplier' table. After loading it a second time it now appears.
|
|
| Top |
|
|
|
throttlehappy
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Sun Aug 06, 2017 2:56 am |
|
|
| Senior Member |
Joined: Sat Feb 12, 2011 11:27 pm
Posts: 2032
Location: Northern NSW
|
Sambo88 wrote: The Lorax wrote: Sambo88 wrote: Am I missing something here? all I have is 0.00000000000
AZ1G101M - 850AC Interesting - must have been changed at some point in your rom's history by someone.....? Just had a look at stock & patched version I have; value is 0.000061035156 (same address - 850AC, multiplier is same as many other 32bit roms of same era) do I have to do anything to the 32bit base file? I just tried the original factory rom and its doing the same thing. Just to confirm I am adding this to my def file: Code: <table type="2D" name="Engine Load Limit B Maximum (RPM) - Multiplier" category="Mass Airflow / Engine Load" storagetype="float" endian="big" sizey="1" userlevel="4" storageaddress="0x850AC"> <scaling units="multiplier" expression="x" to_byte="x" format="0.000000000000" fineincrement="0" coarseincrement="0" /> <table type="Static Y Axis" name="" sizey="1"> <data>Engine Load Limit B Maximum (RPM) - Multiplier</data> </table> <description>Change this value to change the maximum of the Engine Load Limit B Maximum (RPM) table from it's nominal value. By setting this field to twice (x2) of it's nominal value you will increase the cap of the Engine Load Limit B Maximum (RPM) to double it's nomial value.</description> </table> Confirmed it works. Ran 7.2g/rev Just use Shift&8, then multiply by 2
|
|
| Top |
|
|
|
Sambo88
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Sun Aug 06, 2017 3:02 am |
|
|
| Newbie |
|
Joined: Tue Jun 09, 2015 7:15 am
Posts: 79
Location: Brisbane, Australia
|
|
Got it working! Cheers!
_________________
09 audm wrx - merp full sd mode - running edm forester rom AZ1G101M
|
|
| Top |
|
|
|
throttlehappy
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Sun Aug 06, 2017 7:54 am |
|
|
| Senior Member |
Joined: Sat Feb 12, 2011 11:27 pm
Posts: 2032
Location: Northern NSW
|
bencheng0508 wrote: AZ1G900P
AZ1E400U
need address
many thanks.. AZ1G900P Is same as AZ1G900C/AZ1G900O
|
|
| Top |
|
|
|
Patrick P931
|
Post subject: Re: Engine Load Limit B (RPM) table - cannot raise value Posted: Thu Sep 20, 2018 8:09 pm |
|
|
| RomRaider Donator |
Joined: Tue Oct 25, 2011 11:00 am
Posts: 1305
Location: Stockholm, Sweden. Sea level.
|
edit: ended up using AZ1N100M and tested merpmod, seems to work... AZ1N100G Thanks in advance.  Patrick
_________________
I love the sound of that tune!
|
|
| Top |
|
|
Who is online |
Users browsing this forum: Google [Bot] and 13 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
