RomRaider

I lost my Carberry tuned bugeye thanks to a careless driver in snow, but was lucky enough to get into a 2016 WRX. Is there a way we could get a subforum set up for the DIT models? I'm having an impossible time trying to figure out if I can use RR or not. Also it would help get things moving for the platform I think.

Thanks!

No easy DiT tuning solution on RR yet

Unfortunately Subaruedit(EpifanSoft) is the only app you can use Afiak. Works like a charm.

I'm curious - has anybody tried tuning using the definitions I put together here: viewtopic.php?f=34&t=10538&start=75 ?

Technically, you should be able to tune the DIT models now - Tactrix has confirmed that the OP2 reads and flashes the SH72543R models.

The definitions provided do work for editing the files.

I'm still having the same problem regarding flashing the ECU as I posted in that thread, though (read works OK, but rewrite fails when attempting to start the programming session). I emailed Tactrix support about it and while they said they would investigate the issue, I have yet to hear any more than that.

I have been using ATR to tune for my EBCS, TGV/EGR deletes, catless j-pipe, etc. It is working ok for now. But with Cobb implementing this new required class to get the new software (which apparently will have a lot more features), I am leaning more towards Romraider anyways. Has any progress been made on the DIT definitions?

Also, I am not a programmer by any means, but if someone is working on this and could use a hand, I would be glad to learn how. I just need to be pointed in the right direction.

Once we have some momentum, then hopefully we can jump into mods like carberry/MerpMod for the DIT