UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT Comp

vaccine · **Posted:** Thu Jun 08, 2017 5:40 am

That doesn't work either, something is afoot! Cut and past from excel no good either, surely coping from RR would be setup! Not sure what else can do, all these I have tried but screen shots for reference

vaccine · **Posted:** Thu Jun 08, 2017 5:42 am

Instructions also say to copy the VVT table, not columns or rows!

Kodename47 · **Joined:** Sun Jul 13, 2014 10:12 pm **Posts:** 111

It seems to be a bug, it didn't do then when it was initially developed. However if the RPM rows stay there then it appears to still run when you hit go.

vgi · **Joined:** Mon Oct 28, 2013 12:28 am **Posts:** 149

oops, missed testing those tables when I made validation stricter, fixed in v2.4.1

vaccine · **Posted:** Mon Jun 19, 2017 8:08 am

Thanks very much for the little program, works an absolute treat.
Have you looked at incorporating the old KnockCounter14 XLS that helped with where to pull timing.
might be nice to load a log file, insert current timing table and then show possible corrections?

trez0r · **Posted:** Mon Jun 19, 2017 8:20 am

You can do that (and much more) using Log Stats tab. Set axis to your ignition table, select Data as FLKC+FBKC and set Stats to "Minimum".

vaccine · **Posted:** Mon Jun 19, 2017 11:24 am

That is awesome. Thx
Doesn't really report back knock in same fashion though ;-)

Kodename47 · **Joined:** Sun Jul 13, 2014 10:12 pm **Posts:** 111

I just simply add a column of data with a formula of:

Code:

=IF(FBKC2<FBKC1,FBKC2,IF(FLKC2<FLKC1,FLKC2,0))

Then use that to run through the Log Stats tab, should work a treat :wink:

vaccine · **Posted:** Wed Jun 21, 2017 1:10 am

Thanks K', works like a charm.
Curious though on the nested IF statement.
Cant just use: =IF(FBKC2<FBKC1,FBKC2,0) as works the same??

Kodename47 · **Joined:** Sun Jul 13, 2014 10:12 pm **Posts:** 111

vaccine wrote:

Thanks K', works like a charm.
Curious though on the nested IF statement.
Cant just use: =IF(FBKC2<FBKC1,FBKC2,0) as works the same??

That will work just for FBKC, as FBKC and FLKC cannot be active at the same time my formula will give you a datapoint at the moment either FLKC or FBKC starts to reduce timing.

Makaveli · **Posted:** Sat Jul 01, 2017 8:57 am

Hi,

I'm using the "MAF VE Calc" Tab to try and make an VE base map using your current maf scaling
I cant seem to get the MAF builder to work correct? Boost in log is psi rel sea level.

vgi · **Joined:** Mon Oct 28, 2013 12:28 am **Posts:** 149

Are you running Merp's SD patch with Speed Density Mode = MAF Mode?
You really need to provide more info and attach your log(s) and current SD table.

Btw, did you read Wiki, did you follow link to this thread - http://www.romraider.com/forum/viewtopi ... =32&t=8080?

Makaveli · **Posted:** Sat Jul 01, 2017 10:45 pm

vgi wrote:

Are you running Merp's SD patch with Speed Density Mode = MAF Mode?
You really need to provide more info and attach your log(s) and current SD table.

Indeed. Log already attached. Current SD table below

vgi wrote:

Btw, did you read Wiki, did you follow link to this thread - viewtopic.php?f=32&t=8080?

Yep

vgi · **Joined:** Mon Oct 28, 2013 12:28 am **Posts:** 149

@Makaveli so did you try running the Merp's SS, how did that go?

Kodename47 · **Joined:** Sun Jul 13, 2014 10:12 pm **Posts:** 111

Does the Engine Load Compensation tab do open loop? If not, can we have the option that it does?

RomRaider

Forum rules

UTILITY: CL/WOT MAF Scaling | Log View/Stats | Load/IAT Comp

Who is online