MerpMod Switch/flexfuel version needed by anyone ?

The Lorax · **Joined:** Tue Nov 04, 2014 11:51 am **Posts:** 219

Makaveli wrote:

Edit: Should be able to test the logger def yourself once you load it in it says Error: java.lang.NullPointerException in red down the bottom. old defs no error.

How many parameters were you trying to log at the time? I recall having this error show up after I'd loaded a certain number of parameters. Any more would give same error, using less - happy days. Wasn't specific to any parameter. Just a thought.... but of course may not apply in this instance.

andea79 · **Posted:** Fri Aug 25, 2017 12:57 pm

swami wrote:

a version for A2UG000k would be greatly appreciated.

anything in the works for the legacy?

after a few days of cursing

because it seems to be a strange rom ... testing version ready

andea79 · **Posted:** Fri Aug 25, 2017 1:08 pm

I have attached all flex builds to first post - easier to find ...

swami · **Posted:** Fri Aug 25, 2017 1:12 pm

andea79 wrote:

swami wrote:

a version for A2UG000k would be greatly appreciated.

anything in the works for the legacy?

after a few days of cursing

because it seems to be a strange rom ... testing version ready

thank you very much.
yes it is a strange rom indeed. none of the other merpmod builds were compatible

Makaveli · **Posted:** Fri Aug 25, 2017 10:51 pm

andea79 wrote:

Good to see testing goes forward

Yours was an older version regarding LC - attached the latest flex version - hopefully you won't have the DTC problem sambo88 had with an ealier version ...

Regarding logger : I see no errors when setting def in logger but it may happen if you have a profile saved in logger with several parameters already checked and open the logger with cable connected to the car -> if this is the case can you try uncheck selected parameters one by one to see which one is causing the error

The Lorax wrote:

How many parameters were you trying to log at the time? I recall having this error show up after I'd loaded a certain number of parameters. Any more would give same error, using less - happy days. Wasn't specific to any parameter. Just a thought.... but of course may not apply in this instance.

Cheers guys! Wasn't logging much maybe 15 parameters which is nothing for CAN.
I've fixed the connecting issue though. Uninstall & re-install didn't help than i came across the .Romraider folder which is still left being after uninstall which i deleted. Working as intended now

Testing flex version in the coming days thanks again Andea79

Sambo88 · **Posted:** Sat Aug 26, 2017 3:08 am

i am having some dramas getting the rom to open in romraider. I need to open it in romraider to double the "load load limit multiplier" (I only have the defined address for this in romraider format)

I assign the romaider defs supplied with the rom in this thread but it says "ecu defs not found" when trying to open the rom.

what the hell am I doing wrong??

Makaveli · **Posted:** Sat Aug 26, 2017 3:46 am

Map switch on the AZ1G900C-Flex version doesn't work. Haven't checked launch control yet though

Sambo88 · **Posted:** Sat Aug 26, 2017 3:51 am

Makaveli wrote:

Map switch on the AZ1G900C-Flex version doesn't work. Haven't checked launch control yet though

Did you set the switch mode you require?

Makaveli · **Posted:** Sat Aug 26, 2017 4:10 am

Sambo88 wrote:

Makaveli wrote:

Map switch on the AZ1G900C-Flex version doesn't work. Haven't checked launch control yet though

Did you set the switch mode you require?

Cheers. You mean like boost hacks is enabled? Map switch worked fine on 1st version.
Sorry i can't help your issue

edit: Oh i see now. Map switch input mode has changed this version.

andea79 · **Posted:** Sat Aug 26, 2017 6:22 am

Yes, Map switch input and Map blending have changes in the latest version in order to combine all flex/3 maps changing and 6 maps changing .... also requires the latest base32.xml from the ecuflash definitions from the zip.

If not using flex /blending you should set up Map blending to disabled and choose only Map switch ...

andea79 · **Posted:** Sat Aug 26, 2017 6:31 am

Sambo88 wrote:

i am having some dramas getting the rom to open in romraider. I need to open it in romraider to double the "load load limit multiplier" (I only have the defined address for this in romraider format)

I assign the romaider defs supplied with the rom in this thread but it says "ecu defs not found" when trying to open the rom.

what the hell am I doing wrong??

not sure

a print screen from me ...

The Lorax · **Joined:** Tue Nov 04, 2014 11:51 am **Posts:** 219

Sambo88 wrote:

i am having some dramas getting the rom to open in romraider. I need to open it in romraider to double the "load load limit multiplier" (I only have the defined address for this in romraider format)

Hi Sam, pop this in your ECUFlash AZ1G101M.xml definition file:

Code:

<table name="Engine Load Limit B Maximum (RPM) - Multiplier" address="850ac">
</table>

Sambo88 · **Posted:** Sat Aug 26, 2017 7:17 am

The Lorax wrote:

Sambo88 wrote:

i am having some dramas getting the rom to open in romraider. I need to open it in romraider to double the "load load limit multiplier" (I only have the defined address for this in romraider format)

Hi Sam, pop this in your ECUFlash AZ1G101M.xml definition file:

Code:

<table name="Engine Load Limit B Maximum (RPM) - Multiplier" address="850ac">
</table>

Thank you good sir!!!

The Lorax · **Joined:** Tue Nov 04, 2014 11:51 am **Posts:** 219

Here's my first foray into ROM patching.

Many thanks to Andea79 for helping out with all of this. It wouldn't have gotten to this point without him! (And of course Merp, TD-D, NSFW and all the other guys who've done huge amounts of grunt work over the years)

The ROM is the Flexfuel version that Andea's currently got running on the first post of this thread.

Suitable for AZ1E401A - 2008 USDM WRX.

Let us know how it goes/issues, in its testing phase.

If all works out, will put up in first post

welaish · **Joined:** Tue Apr 29, 2014 4:48 am **Posts:** 946

I suggest to add Version number to the release to be able to keep track on the latest.

RomRaider

Forum rules

MerpMod Switch/flexfuel version needed by anyone ?

Who is online