Exotruck CarBerry project

terryjr · **Posted:** Mon Sep 17, 2018 1:08 pm

trez0r wrote:

Coincidentally I just finished installing this goodness https://legacypic.uk/infopages/transmis ... ty754vbaaa

And now my clutch slips.. Let's hope it is just a bit of contamination that will burn/wear off. I recall last time I pulled and reinstalled the gearbox it also slipped for a short while under heavy load.

EDIT: As I expected, after more city driving the clutch does not slip anymore. Just came back from a half an hour blast on the roads - new box and lsd feels amazing!

Would be interesting to know what causes this slipping phenomenon after pulling the clutch basket off. My bet is on possible dirty fingerprints left on the surfaces.

If your using a different flywheel then it just needs some time to seat, theres also probably some oxidation on it

terryjr · 10.22.18.bin.zip [71.31 KiB]

todays rom.

trying to determine how to wire ecu for eithe ac switch or rear defogger for the antilag/rotational idle

terryjr · **Posted:** Fri Nov 30, 2018 1:55 pm

Running a tad lean now. Afr's pushing 12:1, consistant 5% learning values. Think one more slight tweak in the injector scaler oughta do it. Just can remember if i left it at 1075cc or 1050cc. 1000cc i was in the 9's. Trying to keep my VE table 1&2 withing a few percent of each other so i'm making global flex changes using the injectors scalar tables 1&2

I think 1075, but maybe 1050cc
https://datazap.me/u/terryjr/1075cc?log=0&data=7

1100cc was real lean. Wideband would disagree until i recalibrated it.

terryjr · **Posted:** Tue Mar 05, 2019 4:23 pm

jon7009 wrote:

hey, at least it's trying to turn over and run lol
that's pretty low for voltage

what injectors are they?

What front o2 sensor scaling you using for standard usdm bugeye sensors?

My front o2 sensor scaling seems to have changed somewhere along the line

terryjr · **Posted:** Tue Sep 03, 2019 7:39 pm

current rom post

ej206, 24psi, all the crackle pop

swappedGF · **Joined:** Thu Nov 25, 2021 2:12 am **Posts:** 1

Terry - can I ask what injectors you ended up going with? I've been poking around and saw you also do not see the worth in the Injector Dynamic premium when we are the tuners..

Google did it's geo-magic and pointed me to these guys as I'm currently in their neighborhood - when I was researching Fuel Injector Clinic injectors.
https://fuelinjectorconnection.com/products/fic-bosch-1200cc-for-subaru

I may drop by their shop this week to have a chat. But they are offering a black friday deal currently. (Full disclosure I think this is my first post and I'm also working on a minimum post count for any future tuning problems I have..,)

terryjr · **Posted:** Sun May 21, 2023 12:18 pm

swappedGF wrote:

Terry - can I ask what injectors you ended up going with? I've been poking around and saw you also do not see the worth in the Injector Dynamic premium when we are the tuners..

Google did it's geo-magic and pointed me to these guys as I'm currently in their neighborhood - when I was researching Fuel Injector Clinic injectors.
https://fuelinjectorconnection.com/products/fic-bosch-1200cc-for-subaru

I may drop by their shop this week to have a chat. But they are offering a black friday deal currently. (Full disclosure I think this is my first post and I'm also working on a minimum post count for any future tuning problems I have..,)

sorry for delay, im currently on ID1700. they arent fantastic. im currenttly build a ej207 truck and its getting FIC1650's

terryjr · **Posted:** Thu May 25, 2023 2:24 pm

Updated first post mod list. Had a Dyno day other day. First time in rollers since the new fuel pumps and 4 bar map sensor. Peak boost went from 29psi to 31.5, power up from 520 to 586whp. I'd love to post rom but it has a protuned ignition timing table since I've gotten with the IAG block. The rest is still all me but rules are rules.

https://youtu.be/HkQR7pyrpqk

RomRaider

Forum rules

Exotruck CarBerry project

Who is online