RomRaider

In the Romraider Logger definitions there are parameters for "Solenoid Valve Current". In regard to those related to the 5AT transmission for shifting, AWD, lock-up and line pressure, is the indicated current an actual measurement (made by the TCM of the [average] current flow to the solenoid), or is it a target or presumed current (perhaps calculated from the duty cycle and battery voltage)?

(There's also corresponding "Solenoid Valve Pressure" parameters in the definition list, but in the FSM these are described as "Target Pressure" and, therefore, clearly not actual pressure.)

Solenoid current value is most probably calculated from the duty cycle.
This is exactly so for ecu OCV Solenoid Current Right\Left values.

That's what I thought, but haven't been able to find any documentation or results of actual measurements. I was focusing on the transmission parameters. Is there any documentation or actual test reports that indicate this for the ECU values?

Those findings are from ecu software hacking.
You may analyze SSM parameter calculations in you particular ecu software.