RomRaider

Can someone tell me what the addresses are for the different AF#3 tables are so that I can set them all to zero.

I have searched and found two of the tables but can't find these:
-Closed Loop fueling target compensation rear O2
-AF Learning Max Threshold
-AF Learning Min Threshold
-AF 3 Correction Adder (Increase)
-AF 3 Correction Adder (Decrease)

2010 Subaru 2.5i Impreza
EZ1GB10G
ECU: 6E12188007

Thank you in advance for your time and effort.

I'm just getting started here and would like to see you succeed. I also have a 2010 impreza 2.5i premium m/t that
I just milled and ported heads also has a Nvida exhaust, I think that's the name, sounds like a video card. Anyhow, it runs well enough but knowing I upped the compression with a good 20 thousandths taken off (0.020") the heads it should run better and get better gas mileage. So keep us posted

-AF Learning Max Threshold 000C6FB0
-AF Learning Min Threshold 000C6FA0

This rom does not users the adders, it has the AF3 correction limits. These are already defined, and available on my Github repository.