RomRaider

Hey,

I need some support concerning CAN-bus logging or sniffing with Tractrix OP2.0 Stand-alone-logger.

I´d like so log CAN-bus without alltime haveing a labtop and Vector CANape/alyser in car.
So I like to uese my tractrix.

Does someone every use stand-alone-logger for simple CAN-sniffing?

How to configure ?
I found some descriptions in "sanples-> canlogging", but it seem to be some source code to be compiled. Never worked on this kind of stuff on tractrix, so some can give me support, what to do ?



Times ago, I asked in Tractrix-Forum simular, to implemented CAN-logging functionallity without protocol, but no replay.

Final solution should be to have a logcfg.txt configuration, simular to UDS or SSCAN-logging



Anyone able to add something like this to Stand-alone-logger functionallity instate of Tractrix themself ?

If yes, IMO next step is to extend functionallity to CAN-FD

Thanks for hints and help
BR Jochen

that´s not the task of this post...

I got profressional tools for sniffing, but I what to enable Tractrix Stand-alone-Logger to have it simple and cheap..

If stand-alone-logger will support CAN-logging and sniffing, it will help many users on common cars

true, logging just on the tactrix at canbus speeds would be more ideal than the slow polling rate it currently supports to SD card

If you want a config for OpenPort 2 logging, you can use this tool to generate it from a RR Logging Profile.

As for sniffing, the OP2 can, but only to a connected laptop. It will not record sniffed CANbus packets to SD.

Dale, the aim is realy to sniff CAN-bus on mirco-sd on Tactrix not to need to have the labtop in car.
If I need to use labtop, I take my Vector-tools..

I ask in Tactrix-forum in 2017 but no replay. Do you know if Cobly or Mike still work in Openport functionallity or is any "thirdparty" is able to add functions stand-alone-logger ?

BR Jochen

I haven't spoken to either of them in years, so I don't know the plan to add functionality.