Deceleration

ZekWee · **Posted:** Tue Dec 22, 2020 2:03 pm

CretuRares wrote:

ZekWee wrote:

CretuRares wrote:

I would like to give a massive thank you for all the ones here that contributed with trials and errors , because of you i managed to get some absolutley impresive resaults with an E36 320i . Pops and bangs with nice flames and that bang that hits your chest . Here is the result
https://youtu.be/I-1QVVJeA_M

Unfortunately i never managed to get high RPM "pop", only below 3500rpm and the flames are totally random, maybe i'm wrong, sorry for my english i am attaching a video and my file.
https://youtu.be/xUVu-EoXL6c
I really like your result if you could add your file that I can compare it will help me a lot thank you

Yeah sure , of course , because all other shared their work , i will do allso , ill post tomorrow the mod file

Nice thanks

Bahmanson · **Posted:** Wed Dec 23, 2020 2:01 am

CretuRares wrote:

I would like to give a massive thank you for all the ones here that contributed with trials and errors , because of you i managed to get some absolutley impresive resaults with an E36 320i . Pops and bangs with nice flames and that bang that hits your chest . Here is the result
https://youtu.be/I-1QVVJeA_M

Yo bro,

Can you share your stock 24kb flash and pop&bang added 24 kb flash?

CretuRares · **Joined:** Tue Dec 15, 2020 3:45 pm **Posts:** 6

here it is , my mod file 24kb with PB and flames from 6800rpm to 3000 rpm

Bimmer12 · **Joined:** Mon Dec 14, 2020 1:13 pm **Posts:** 134

CretuRares wrote:

here it is , my mod file 24kb with PB and flames from 6800rpm to 3000 rpm

hi,this is for m52b20? I cant open with romraider , can you put in other format (.bin) to open in romraider ,thanks sorry for my bad english=)

TheHaaku · **Posted:** Wed Dec 23, 2020 4:27 pm

unai wrote:

hi,this is for m52b20? I cant open with romraider , can you put in other format (.bin) to open in romraider ,thanks sorry for my bad english=)

add .bin in file name

Bimmer12 · **Joined:** Mon Dec 14, 2020 1:13 pm **Posts:** 134

TheHaaku wrote:

unai wrote:

hi,this is for m52b20? I cant open with romraider , can you put in other format (.bin) to open in romraider ,thanks sorry for my bad english=)

add .bin in file name

thanks ,
How can I cancel somda lambda? i have problems with flames and pops maps because i have desconected 2 lambdas in catalizer ( i have suprimed catalizer)

juanixo · **Posted:** Wed Dec 23, 2020 6:37 pm

CretuRares wrote:

here it is , my mod file 24kb with PB and flames from 6800rpm to 3000 rpm

I just studied your map. It's aggressive haha.
In ig base -23, + the delay of the deceleration maps.
I have a similar map.
The only thing I don't like is that the fuel restore will always be on (high consume of fuel). I have not tested if the pops stop at less than 3000rmp. the interesting thing would be to make a map that makes big pops only with the AC on.
I would have to adapt it to my 23i, I may try it.
So you didn't even put a hard limiter?? . Only decelaration,ignition base and fuel base map were modified?
Greetings and merry christmas :lol:

Bimmer12 · **Joined:** Mon Dec 14, 2020 1:13 pm **Posts:** 134

juanixo wrote:

CretuRares wrote:

here it is , my mod file 24kb with PB and flames from 6800rpm to 3000 rpm

I just studied your map. It's aggressive haha.
In ig base -23, + the delay of the deceleration maps.
I have a similar map.
The only thing I don't like is that the fuel restore will always be on (high consume of fuel). I have not tested if the pops stop at less than 3000rmp. the interesting thing would be to make a map that makes big pops only with the AC on.
I would have to adapt it to my 23i, I may try it.
So you didn't even put a hard limiter?? . Only decelaration,ignition base and fuel base map were modified?
Greetings and merry christmas :lol:

I have tested the map, they look like AK-47 shots, the only thing that drops a lot of laps almost until the engine dies

Freelko · **Joined:** Fri Sep 18, 2020 3:48 pm **Posts:** 3

Hey, i started editing MS41.0 with RR.
I adjusted rev limiter, pops&bangs, etc.
I want flames/bangs between shifting, but i dont find any tutorial how do it.
Learning is too hard for me, because my english is bad, and there arent instructions in czech language.
Anybody help me with it?
And is it possible do it in MS41.0?

Thanks.

CretuRares · **Joined:** Tue Dec 15, 2020 3:45 pm **Posts:** 6

juanixo wrote:

CretuRares wrote:

here it is , my mod file 24kb with PB and flames from 6800rpm to 3000 rpm

I just studied your map. It's aggressive haha.
In ig base -23, + the delay of the deceleration maps.
I have a similar map.
The only thing I don't like is that the fuel restore will always be on (high consume of fuel). I have not tested if the pops stop at less than 3000rmp. the interesting thing would be to make a map that makes big pops only with the AC on.
I would have to adapt it to my 23i, I may try it.
So you didn't even put a hard limiter?? . Only decelaration,ignition base and fuel base map were modified?
Greetings and merry christmas :lol:

Well i tryed to make PB active only with AC on but it wouldnt do anything. Maybe because the AC wasnt working at all ( no compressor on the car ) , i did test the the thing , under 3000 rpm woundlt pop at all , that was the only thing i could do to make it work and still street drivable. Car made some insane pops while driving. You could hear the bang vibrating the whole chassis . I've done in the past on e46 e39 with ms42 ms43 PB activated only via AC , but here no chance. Anyways , no hard limiter because customer only wanted bang bang . Not even lambda probes deleted.

CretuRares · **Joined:** Tue Dec 15, 2020 3:45 pm **Posts:** 6

unai wrote:

juanixo wrote:

CretuRares wrote:

here it is , my mod file 24kb with PB and flames from 6800rpm to 3000 rpm

I just studied your map. It's aggressive haha.
In ig base -23, + the delay of the deceleration maps.
I have a similar map.
The only thing I don't like is that the fuel restore will always be on (high consume of fuel). I have not tested if the pops stop at less than 3000rmp. the interesting thing would be to make a map that makes big pops only with the AC on.
I would have to adapt it to my 23i, I may try it.
So you didn't even put a hard limiter?? . Only decelaration,ignition base and fuel base map were modified?
Greetings and merry christmas :lol:

I have tested the map, they look like AK-47 shots, the only thing that drops a lot of laps almost until the engine dies

You cand fiddle with fuel cut hyst minimum and maximum raise the minimum to like 600 instead of 448 rpm

Bimmer12 · **Joined:** Mon Dec 14, 2020 1:13 pm **Posts:** 134

You cand fiddle with fuel cut hyst minimum and maximum raise the minimum to like 600 instead of 448 rpm[/quote]
good, I'll try what happens, the only thing how could I cancel the 2 sombda lambdas that it brings in the catalyst? g

CretuRares · **Joined:** Tue Dec 15, 2020 3:45 pm **Posts:** 6

unai wrote:

You cand fiddle with fuel cut hyst minimum and maximum raise the minimum to like 600 instead of 448 rpm

good, I'll try what happens, the only thing how could I cancel the 2 sombda lambdas that it brings in the catalyst? g[/quote]
You cant delete the pre cat lambda probes, only the post cat can be deleted

Bimmer12 · **Joined:** Mon Dec 14, 2020 1:13 pm **Posts:** 134

CretuRares wrote:

unai wrote:

You cand fiddle with fuel cut hyst minimum and maximum raise the minimum to like 600 instead of 448 rpm

good, I'll try what happens, the only thing how could I cancel the 2 sombda lambdas that it brings in the catalyst? g

You cant delete the pre cat lambda probes, only the post cat can be deleted[/quote]
How could I do it and what do I get out of it?

fotokrzykacz · **Joined:** Thu Jan 07, 2021 8:54 am **Posts:** 1

Does anyone have a photo from romrider how to make popcorn like in the movie? link below

https://www.youtube.com/watch?v=TUyii-VPbFE

RomRaider

Forum rules

Deceleration

Who is online