CarBerry ROM - 16bit Speed Density Project

ayce200 · **Posted:** Wed Jul 29, 2020 8:53 pm

FLY ME OUT , BRO.

we can tune this for you.

if ur lean at idle, check ur comps, check the SD fueling and make sure u have a cell that's below idle (600rpm), what afrs are you pulling at idle? 15's?

FYI, my car evolved, you prob saw it like this:
https://www.instagram.com/p/CCeg8CxHeb6 ... _copy_link

its now this:
https://www.instagram.com/p/CDBwd8SnfDz ... _copy_link

iNfEk · **Joined:** Sat Jun 02, 2007 10:00 pm **Posts:** 27

Driving is fine 14~10 AFR depending on how much I push the gas.

Initial warm up is like 15 when it’s cold via a innovate gauge after my turbo. 17-18 when it’s warm. Usually around 17.7AFR. gotta resolve this before going further you know? Car sits a lot. Last tuned October 2018 by Clark. Haven’t really driven it. Take it out to inspected but park it after and just use my foz. Currently have motive composite TGV deletes. Gonna change them to Spec C top feeds since they’re metal and will put phenolic spiders under them.

Changed WB02 sensors twice, changed upstream oxygen sensors twice (one aftermarket Denso new and one oem per Clark’s recommendation same readings). Changed vacuum lines and checked couplers on the fmic. All on.

Moved WB02 sensor to upstream while Clark was here and I was getting 11 AFR. Ecu sees 14.7 via RR at the time. Hadn’t checked anything yet on the ecu. Maybe this weekend weather permitting. Hurricane Douglas was supposed to his last weekend. Derailed plans.

Waiting on IAG AOS rebuild kit to make sure no air is coming in through there, gonna change out all gaskets under TGV upward to verify all good.

Since taking it out of storage I drive it once a week for my commute on Monday’s to drop my kids off but that’s it. 9k miles on a new 207 so kind of sad about it.

Sent from my iPhone using Tapatalk Pro

ayce200 · **Posted:** Wed Jul 29, 2020 9:11 pm

i know the feeling, i got a 8/10yo as well.

sounds like maybe there is an idle leak or post maf leak, but that would only matter on a MAF tune. if its SD, it won't care and idle at whatever closed loop is or what warm up comps would be.....

if its SD, u can remove all the piping before the TB and see if it idles and pulls into the correct AFR (14.7)

iNfEk · **Joined:** Sat Jun 02, 2007 10:00 pm **Posts:** 27

This is via my wb gauge though I’m seeing 17-18AFR. I will try and if it says 14.7 from the ecu I will check the WB02 gauge then.

Sent from my iPhone using Tapatalk Pro

ayce200 · **Posted:** Thu Jul 30, 2020 1:02 pm

if the ecu is reporting it wants to run at 14.7 which it should at idle, then maybe your injector scaling is incorrect? or you are losing fuel pressure somewhere...

sirbo · **Joined:** Thu Sep 03, 2020 4:27 am **Posts:** 1

hi , i want to know if anyone try that on 2004 usdm ecu 16 bit ??
i have a ej207 in the car , wrx 2004 stock ecu .
or can flash my stock ecu with ej207 map 16 bit each ecu .
i have a 22611ah791 ecu

bludgod · **Posted:** Mon Sep 07, 2020 4:21 pm

sirbo wrote:

hi , i want to know if anyone try that on 2004 usdm ecu 16 bit ??
i have a ej207 in the car , wrx 2004 stock ecu .
or can flash my stock ecu with ej207 map 16 bit each ecu .
i have a 22611ah791 ecu

it should flash to your 2004 16bit ECU, however the WRX ecu won't run the AVCS heads on your EJ207 engine (assuming they were fitted with the 207 engine).

andya · **Joined:** Sun Nov 02, 2008 4:32 pm **Posts:** 274

bludgod wrote:

sirbo wrote:

hi , i want to know if anyone try that on 2004 usdm ecu 16 bit ??
i have a ej207 in the car , wrx 2004 stock ecu .
or can flash my stock ecu with ej207 map 16 bit each ecu .
i have a 22611ah791 ecu

it should flash to your 2004 16bit ECU, however the WRX ecu won't run the AVCS heads on your EJ207 engine (assuming they were fitted with the 207 engine).

No!!! Works only on 02-03 USDM. Tried it on a 2004 and crashed the ECU, different flash method.

kareston · **Posted:** Thu Oct 22, 2020 9:33 am

Can someone pls explain how to get carberry rom? So I just patch speeddensity.hex, upload definitions to romraider, edit tables save as .bin and upload it to ecu instead of original rom? ecuflash reads it as a jdm subaru and I have EDM impreza wrx 2004. Can't really find instruction how it's done properly

Rexzzi · **Joined:** Sat Oct 31, 2020 11:06 am **Posts:** 1

hello tuners
i wanted this carberry Map for my JDM 06 STi,Internal ID-A4TJ121B.
will it work?

Thank you.!

arthurtoo · **Joined:** Wed Nov 23, 2011 2:24 pm **Posts:** 17

Rexzzi wrote:

hello tuners
i wanted this carberry Map for my JDM 06 STi,Internal ID-A4TJ121B.
will it work?

Thank you.!

yes, it will work.

02usdmbugeye · **Joined:** Thu Apr 08, 2021 7:46 pm **Posts:** 1

Hello I’m new to all this but I have tried everything to get carberry to work on ecu flash and rom raider but it won’t show up in either I have tried putting the definitions in every place I could see fit and loaded them in rom raider and nothing works can anyone help me out

bludgod · **Posted:** Fri Apr 09, 2021 11:56 am

if you want to send me a PM we can hook up on teamviewer or quick support and I can set it up for you

lyfdriftking · **Joined:** Sat Apr 25, 2020 1:55 am **Posts:** 9

hello
I have a JDM 05 ej207 v8 sti.
I want to flash the CarBerry Rom. But i don't know how to start.
I have already used the CarBerry ROM Patch.exe to patch my stock rom and placed the CarBerryBASE.xml file as well as CarBerry.xml def into ecuflash's folders.
Now ecuflash can load the carberry rom correctly.
Can I straight flash to my car and to enjoy the CarBerry Rom?
thx

bludgod · **Posted:** Mon Apr 26, 2021 8:24 pm

don't patch the stock rom from your car, patch the rom that comes with the carberry zip, or have a nosey on the forums here there are a few decent carberry maps you can start with that will at least get the car running a little better that you can tune it easier.

RomRaider

Forum rules

CarBerry ROM - 16bit Speed Density Project

Who is online