RomRaider

Hey,

working on the Boxer-Diesel, the ECUFlash 32BITDIESELBASE grows with every new dump and emission class I work on.

So, to have a eayser update of this map-base, I will post the lastest one in this threat instate of the dump specific ones.

If you work with ECUFalsh and the Boxer-Diesel dumps, be sure allways to use the lastest ones, attached to this threat

don´t forget:

Support the forum, that supports you: Donations are welcome!

Jochen

[edit 2015-12-15: update to a newer version]
[edit 2016-09-29: update to a newer version]
[edit 2019-10-25: update to a newer version]
[edit 2020-02-23: update to a newer version]

Can I suggest Calibration Air Mass Sensor (MAF) uses Voltage on an Y Axis to assist with viewing the map in View Graph mode with the benefit of being able to see every value without scrolling

Few other tables would also benefit from it


<table name="Calibration Air Mass Sensor (MAF)" category="Mass Air Flow - Sensor Scalings" type="2D" level="3" scaling="MassAirFlow_4byte">
<description>Calibration Mass Flow Sensor MAF = f(U_MafS).</description>
<table name="MAF Sensor Voltage" type="Y Axis" elements="40" scaling="MassAirFlowSensor_Voltage_4byte"/>
</table>

Yes, you are wellcome

I will collect some other little changes and update the 32BITDIESELBASE in a few days

Jochen

another update of the 32BITDIESELBASE.

Comments and emprovements are wellcome

another update of the 32BITDIESELBASE.

Comments and emprovements are wellcome

another update of the 32BITDIESELBASE.

Comments and emprovements are STILL wellcome

Hello
do you know if any way to read a denso ecu from a forester 2016 2.0 diesel?

I try with ecu flash with no luck
thanks

Tactrix does not support the EURO6 Diesel ECU yet and I don´t expact anything chancing on this.

So you need to look for alternatives:

- the SH7254 still got a AUD interface so you can read and wirte on this
- PCMflash supports the EURO6 ECU
- ECUtek suports the EURO6 ECU

Why not submit this as a pull request to td-d's GitHub repository and maintain it there...? Much easier to keep all the up-to-date definitions in one central location.

2016-2017 Euro 6 seems to use the BRZ ECU

As attached

hi guys, I read my Subaru XV 2.0D my16 Euro6 ecu, via pcmflash and Scanmatik. I wanted to know if the “32bitdieselbase” definitions are ok for my ecu; I tried to open them with my file on ecuflash only that it gives me an error, I don't know if I'm doing something wrong in the process or it's not recognised. Sorry Throttlehappy, is what you posted a definition for ecuflash or the ecu file?

You need a definition for your specific ECU. None exist publicly yet

ah ok, I thought that the "32bitdieselbase" was fine for any diesel version or at least a minimum of generic parameters without going into the specifics of each ecu. Now I will see if there is anyone available to create the definition for my ecu. Thanks for the information!