Ok, here is what I have.
1) Go to logger menu in RomRaider & launch the Utec logger first
2) Goto select port and select the com port the utec is sitting on. There will be 2 ports, one for the obd2 port, one for the serial device the utec uses
3) Go to Action>Start logging. This will start the flow of logger #1 data. Given you have a proper connection to the utec those bar should start moving
4) In RomRaider launch the ECU Logger
5) Select the proper comm port etc and get that data logging
6) To append UTEC data from the #1 logger, select the attribute you want to log as circled in the image below.
7) Use ECU logger as you normally would.
Here are some features of the Utec Program
- If your sound is on, it will talk to you. Seriously. If it sees a knock event while you're driving it will tell you "knock, count #". It says other things but I cant remember right now.
-The other tabs of the utec program are map editing tabs. You can load maps from a file (Load Map> Load from file) or load a map directly from the UTEC on your car (Load Map> Load Map #) Map data will appear in the table tabs. Since this is a test program, the editing tools arent very robust.
- You can only save edited maps to a file on disk. You'll need to hyper terminal them to your UTEC. I'm still working on this functionality.
-If your UTEC is acting up and gets out of sync with the UTEC program, go to Actions>force utec reset.
Thats it from the top of my head. I have not tested this in a while so let me know how things go.
Ohh, also, the only attributes you can log from the utec are the 6 that you see in the screen shot. If you really really need another one added from logger #1. let me know.
-E-
