Deceleration

daniel_rs · **Joined:** Wed Aug 25, 2021 10:14 am **Posts:** 21

Fabio wrote:

daniel_rs wrote:

Hello! I made popcorn on a friend's e36 323 car https://www.youtube.com/watch?v=dQAY3xW3fSE.
Firmware from e36 body version ms41.0, the car never had an air conditioner.
I wanted to make popcorn only when the air conditioner is on.
AC on - popcorn on
AC off - popcorn off
We connected the ground through a button on a 5 pin x20 connector. And fixed Fuel Restore - RPM and Ignition Retard - Decreasing TPS (Closed) to Fuel Restore - RPM (AC on) and Ignition Retard - Decreasing TPS (Closed) (AC on). When we turn on the button, the idle speed gets higher. In INPA, it shows that the air conditioner is on, but there is an error in the air conditioner relay. When the AC is on, there is no popcorn, the Fuel Restore - RPM map works, not the Fuel Restore - RPM (AC on).
How to make the map work (Fuel Restore - RPM (AC on) ?

Did You figure out the problem ?

No. I made a double bin with a switch viewtopic.php?f=42&t=19088

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

hello very good again, after trial and error I have managed to make some other flame in the exhaust, not very big... I will try to attach a video of my tuning.on the other hand I would like if someone could give me a little more knowledge, I will attach a link From cleanish, it's amazing and I love it, I would like to achieve that result.I don't get it to be a flame like that in the exhaust, basically I get more of an explosion.

Instagram link.

https://www.instagram.com/reel/CcyIl1gp ... MyMTA2M2Y=

my progress link
https://youtu.be/JlfCtEt7_to

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

I don't understand why we don't help each other, I see more interest in money lately. I'm not asking for the dish on the table, I'm asking if someone can enlighten me a little

daniel_rs · **Joined:** Wed Aug 25, 2021 10:14 am **Posts:** 21

Bimmer12 wrote:

hello very good again, after trial and error I have managed to make some other flame in the exhaust, not very big... I will try to attach a video of my tuning.on the other hand I would like if someone could give me a little more knowledge, I will attach a link From cleanish, it's amazing and I love it, I would like to achieve that result.I don't get it to be a flame like that in the exhaust, basically I get more of an explosion.

Instagram link.

https://www.instagram.com/reel/CcyIl1gp ... MyMTA2M2Y=

my progress link
https://youtu.be/JlfCtEt7_to

add a little more fuel (0.1 - 0.3) to the first and second columns from 3000 to 5000 rpm of the base fuel map

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

Thank you very much, I have tried to add 0.20 in the first and 0.10 in the second, I have also tried to change instead of restore fuel above cut put fuel cut in 6900 as suggested by pazi88, I will try and show you my result, thanks

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

after trying adding in the first two columns between 0.10 and 0.30 I have not achieved the result I was looking for... I do not get a large flame like the video that I attached... I get a little aggressiveness let's say when exploding, but what I'm looking for is a flame rather than an explosion. Any ideas? I also don't get a quick cut with resume delay at 9 I don't know if it has to do with what vss I have it canceled ... I have a 2.5 stainless steel exhaust without a catalyst and with a sports silencer, I don't know if they could help me by attaching the file...
perhaps adding 1 would achieve that large flame without explosion that I am looking for?

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

This is the second test that I just commented

https://youtube.com/shorts/DBbxzQevJyg?feature=share

valts42 · **Joined:** Wed Nov 14, 2018 4:03 pm **Posts:** 4

https://youtube.com/shorts/yVU7ZpZQRfU?feature=share
ive tried a lot cars, best so far on m52b20

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

valts42 wrote:

https://youtube.com/shorts/yVU7ZpZQRfU?feature=share
ive tried a lot cars, best so far on m52b20

what is your configuration? Haver if you can help me to find the way... I would like the result you have attached

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

Nobody got the result of cleanish? I don't get the same result, I want a giant llama

Bimmer12 · **Joined:** Mon Dec 14, 2020 5:13 pm **Posts:** 134

Could someone please guide me a bit? I believe that not only would I have to modify the added gasoline... I have tried in several ranges and different amounts, the only thing left for me is to try to put 1 or more value of gasoline, I do not ask you to modify the map, simply guide me that I am skipping since after trying many things I do not get the result
I can't get more flame than this..

https://youtu.be/RlFP7ExOcaA

daniel_rs · **Joined:** Wed Aug 25, 2021 10:14 am **Posts:** 21

Bimmer12 wrote:

Could someone please guide me a bit? I believe that not only would I have to modify the added gasoline... I have tried in several ranges and different amounts, the only thing left for me is to try to put 1 or more value of gasoline, I do not ask you to modify the map, simply guide me that I am skipping since after trying many things I do not get the result
I can't get more flame than this..

https://youtu.be/RlFP7ExOcaA

Try to do like this in ignition timing map base and ignition timing map base 2 or send me your bin in PM, I will help

328i-sport-rossi · **Joined:** Tue Jan 24, 2017 11:58 am **Posts:** 478

Bimmer12 wrote:

Could someone please guide me a bit? I believe that not only would I have to modify the added gasoline... I have tried in several ranges and different amounts, the only thing left for me is to try to put 1 or more value of gasoline, I do not ask you to modify the map, simply guide me that I am skipping since after trying many things I do not get the result
I can't get more flame than this..

https://youtu.be/RlFP7ExOcaA

It sure trial and error !! its different for all of us, no one specific motor is in the same conditions as another wether that be due to aged sensors, components, different exhaust, intake, you just have to keep messing, Fuel , air and retarded ignition on decal are the main factors, the rest is down to you messing, to much fuel = nothing , to little = nothing , the same with ignition, the sweet spot is whatever you find works for you.

e36_mafia · **Joined:** Sat Oct 30, 2021 3:49 am **Posts:** 7

Hello everyone ! I have been looking for a while at a good hard cut with fire for ms41 and i didnt find any information or video of it so i started trying things in my car and this is what i came with. I have to clearify that this is not good for the motor , dont give you more hps and its only for show. Sorry for bad english i’m from argentina. The car is a e36 m50b30 with m54b30 intake cam 258hp 326n.m

https://youtube.com/shorts/3HBp0Pl-A1M?feature=share
https://youtube.com/shorts/HwFykP3uTSg?feature=share

r19 · **Posted:** Wed Aug 03, 2022 3:39 pm

Nice result mate! Can you share how you done this hard cut with fire?
It sounds really fast

Изпратено от моят SM-A505FN с помощта на Tapatalk

RomRaider

Forum rules

Deceleration

Who is online