RomRaider

Are you a new member who has joined just to get the definitions files?
Do you want to do pops & bangs?
Do you intend to ask many of the same questions that have already been asked (and answered) without trying the search function first?

If you have answered YES to any of the questions above, this thread is for you!

Post away. Get access to the definitions. Get your pops & bangs!!

Hi I’m Mark. I’ve an e36 328 and looking to get into some tuning petrols after doing some TDI’s

Hi everyone,
I'm trying to increase the rev limiter on my e36 328i from the restricted 5500rpm to +- 7000rpm. I already have the RoomRaider ECU Editor installed and only missing the ecu definitions file to edit the partial ECU file.

Anyone with the copy of the file, please share with me?

Hi, I'm Valentin from France.

I've a problem with my e36 328i with EWS integrated, I'm trying to get this crap OFF !!
Then I might try to stage it since I've discovered Romraider

Hey guys,
Recently swapped my e30 wagon with an m52b28 in Nairobi, Kenya and have an m50 intake manifold on it as well as the top cover, since mine was cracked and had a spare sitting around,
Need some help as i need to tune out the EWS as well as some help tuning in the m50 manifold to help with the additional air intake caused by the m50 manifold.

Have managed to get the bin file needed, just need assistance with the ecu definitions.

Also next step is to turbo the engine! so will need some help with that and the forums are already so great with the general posts on tuning, im no expert yet, but with the forms im sure to get better before i blow up the engine

Hi Guys,

I'm Jake, located in south west England. Got a few M52 projects down here so thought it would be good to get my head around the tuning side of ms41 ecus. Got an e30 that i'm M52 swapping for my girlfriend, plus she has a 323 touring. I have 2 328 coupes, one as a track toy and one as a street car, so plenty to keep us busy.
I'm doing an engine build with 3.0L bottom end so if anyone has any experience of tuning this, that would be awesome to get some advice too

Cheers

just wanted to try as a reply here to get my memebership approved so i can access the definitions. i live in the us and have 1998 z3. just want to be able to tune to match some of the minor mods i have made and get the most out of the car. would appreciate a mod helping me out in this regard. Anarchy

Hello,
I'm from Germany and build Streetdrifters and some beaters in my backyard. Need the Definition Files to Tune my new Project e36 a little better and Flash some Pops and Bangs to get the Most Out of my straightpipe.
Big thanks to the people organizing this Forum the information Here is very good

Hi im Kieran,
I've got an e36 328i, I study mechanical engineering in New Zealand and want to try my hand at tuning and fuel mapping just need the ecu definitions.

Thanks

Hi guys!
I'm Joe from UK, based in Germany.
Looking to get my 328i Ringtool properly tuned to M50 manifold and S52 cams.
All the best!

Hello, im Vegard from norway. I have build a m50b30 engine, and are here to learn more about ecu flashing/tuning. A lot of good information here!

Greetings from finland.

i am new here, and trying to ask as litlle dumb questions as possible

i have couple old e36:s, a coupe and a convertible, so im asking for access to ecu definition files for practicing tuning.

Thanks!

hello my name is Vincent I am from France, I am looking to tune two drift E36s one with a 2l and 2.8 ethanol injectors and the second is a 2.5l swap in flex fuel and switching to turbo in a Secondly. hoping to be able to make a contribution to the software. thank you all.

Hello. My name is Araquem Bacchi de Oliveira, own a BMW e36 328i 1996 automatica. I'm studying how reprogramming works, but my first goal is to disable my EWS.

Hi. I'm Metin from Turkey, 30 years old MSc. Mech. Eng.

I'm not looking for get the map and go away I'm looking forward to do R&D on my M52B20 E36 320i.