STICKY: New Members Thread!

Kendzi · **Joined:** Thu Oct 12, 2023 6:48 am **Posts:** 1

Hello Forum Members,

I hope this message finds you well. I'm excited to be a part of this community, and I wanted to introduce myself. I'm the proud owner of a BMW e39 520i, and I've been enjoying every moment behind the wheel.

However, I've recently encountered an issue with my MAF (Mass Air Flow) sensor, and I'm looking for some guidance. The MAF sensor problem is causing me some trouble, and I'm eager to dive into the log definitions and diagnostic procedures to get to the bottom of this issue. I kindly request access to the log definition files, as it would greatly assist in diagnosing the issue effectively.

Best regards,
Kendzi

Slash74 · **Joined:** Sun Oct 15, 2023 6:52 am **Posts:** 1

Hi,

I'm Richard from France.
I've just learn some interesting things about how to tune ourself the MS41.1 for my 323TI of 1999.

I want to create an e85 map cause I gonna buy some pieces foe ethanol modification, and I'll install it myself soon.

I need to download the XML file with ECU definition for MS41.

Thank you to do all of this on this site and for the BMW calculators, it's awesome !

volenv · **Joined:** Fri Jan 06, 2023 11:12 am **Posts:** 1

Hi,
Volen from Bulgarie.
Looking for definitions on ms41, as i got one lately.
Best regards to everyone

Evil_Knivel · **Joined:** Fri Apr 13, 2018 1:12 am **Posts:** 2

Hi,

my name is Jens. My car is an E36 328i with Schrick camshafts and M50 manifolds.
I like this kind of forum, because there are many professional threads about certain special ECU topics.

Best regards
Jens

Motivatedmoves · **Joined:** Tue May 05, 2020 11:09 pm **Posts:** 1

Hey guys my names Joey I have a 96 328i and I’d really like to be able to delete a couple things and maybe add a couple also! I appreciate the add to the forum and have enjoyed reading all the breakthroughs using this method! Thanks again for I’m sure the countless hours spent making this happen for us e36 guys!

ddavies564 · **Joined:** Thu Nov 23, 2023 12:24 am **Posts:** 1

Hey Guys,

My name is Dillon, I'm looking to tune my DME. Mostly looking for stock .bin/roms to finish up a manual swap on my e36.

Dillon

Schneider7569 · **Joined:** Sat Nov 25, 2023 9:36 pm **Posts:** 1

Hello family! My name is Austin, I'm from the United States. Lifelong mechanic, factory trained Porsche mechanic. Porsche brand ambassador. After many, many years of driving boring daily drivers, I was finally in a position to get buy and build a track toy. I found a clean 1997 328is. I've built the entire suspension, but now it is time to dive into this m52b28.
I've followed all steps on the "OpenMS41 getting started" page, and now just need some definitions :lol:

Segebaden · **Joined:** Tue Nov 28, 2023 3:05 pm **Posts:** 1

Greetings!

I'm a new member of the forum. Recently made the switch from an aftermarket ECU and now planning to revert to the MS41. Excited to turn my E36 with a 2.8L engine into my daily driver again here in Sweden.

VarmianChisel · **Joined:** Fri Dec 01, 2023 1:22 pm **Posts:** 1

Hello everyone
I'm new user of this RomRaider forums so I would like to introduce myself.
My name's Marcin, I'm from Poland.
My car is '91 euro e36 - m50b20 non vanos running on Motronic 3.1. My current goal is to upgrade it to m52b25 single vanos under control of MS41.0.
I will be very grateful for any help and to share my knowledge on what I discovered making this project.
At the moment I am looking for stock tune for m52b25 single vanos with EWS deleted (off course), and without eco fetures such as: o2 sensors after cat, SAP, cat heating etc.

juanansm_ · **Posted:** Mon Dec 11, 2023 10:39 am

Hello
Im from Spain and i have a 318is m52b28 swap made by myself.
I need ms41 defs for cancel ews and can run it.
I read this:
How to Download
To download these files, you must register for an account. Then, you must create a post or thread in the BMW MS41 section and wait for a Moderator to review it. Tell us a bit about yourself, your car and why you want access to these files. Then, your account will be approved and you can download any attachment posted in these threads.
thks!

lurvana · **Joined:** Sat Dec 16, 2023 10:38 am **Posts:** 1

Hi im Luka! I swapped m52 and its ms41 to my e36 318i.
Now needing ecu definitions to get rid of EWS and raising rpm limiter

tuzemen · **Joined:** Sat Oct 17, 2020 3:22 pm **Posts:** 3

Hi, I'm Yigit from Turkey. I'm 30 years old. I own a '98 e36 323ti. I am really interested in cars especially e36

Thanks to this forum I learned EWS off and Hard Limiter tunings for ms41. I am willing to develop myself and get wider my ms4x knowledge..

gavinb · **Joined:** Sun Dec 17, 2023 4:42 pm **Posts:** 1

Hi I’m gavin. I’ve an e36 328 and looking to get into some tuning petrols after doing some TDI’s

ecoalpes · **Joined:** Mon Dec 18, 2023 3:02 am **Posts:** 2

Hi Everyone.
I'm new here.
It's my first time with MS41.
I have 328i with MS41. With Mafless and M3 Throttle.
So I need to tune with Alpha N for best work.
I see on MS41 portal, there is Custom code for this and I can flash this with MS41 QuickFlash, but Where I can find this custom code ?

Thanks for your help.

Pasooo44 · **Joined:** Mon Dec 18, 2023 5:15 pm **Posts:** 1

Hi guys,

I'm Pascal from Germany and I'm here looking for some inspiration to give my 328i a little more power.
Of course, a Pop`s and Bang little should not be missing

RomRaider

Forum rules

STICKY: New Members Thread!

Who is online