RomRaider

IF ANYONE HAS A 06 OBXT AT EJ20X STOCK MAP THAT WOULD LIKE TO SHARE, THAT WOULD BE MUCH APPRECIATED! THANKS YALL

have you checked the post with all the stock roms in it?
https://www.romraider.com/forum/viewtopic.php?f=35&t=7591

This list is great! However, I need an ej20x 2.0L(jdm engine) map for a 06 usdm obxt 2.5L.

I have used another map for a 05 usdm obxt with ej20x in other 05s but this 06 is not compatible with the 05 map i have. I get the p1446 code using the 05 obxt/ej20x swap map.

So im looking for a map to run the ej20x in a usdm 06 outback xt 2.5L.

Alternatively, I could copy everything over from the map I have and make a new map for the 06 using the same scales. I just don’t know how to do this.

OK so your gonna read stock the file off your current ECU, grab the file to match your engine from the stock map repository and then copy over all the tables in the tune from the engines map to your ECU's map and you should be good to go. I don't think its a P1446 code your getting though whats the actual code you have?

What program can I use to pull the bin files up and swap everything over?
Ecu flash?
I have experience flashing ecu’s tuning open source, however, I use a tuner who doesn’t want to do this for me. my experience is just working rom raider and ecu flash to pull original rom and flash new rom. Never altered anything before.
I already have the original rom pulled from the car in a bin file. When I flash over the ej20x map from an 05 obxt it triggers the p1446 code after second drive cycle. I didn’t verify but I can to the understanding that the 05 obxt has this circuit and the 06 does not or they are different voltages or something to that nature.
The car runs good on this map aside from the CEL.

yes ECUflash - sometimes i find it easier to open two copies of the software and have one rom on each.


If your sure it runs fine on the other one then just turn the code off is also an option but i'd be logging either way, I'm curious now why your normal tuner doesn't want to touch it though!

Ok good to know, ecu flash it is.
Was trying to turn the code off but I can’t figure out how. I can disable other codes but this p1446 code says no match when I click the check box next to it.
Any insight there?

Tuner doesn’t want to copy files over as his name is involved so he only wants to do a new tune.
Customers is aware this tune is not ideal but close enough to run it for now.
Did the swap already , just need to get the tune sorted out.

if its saying no match then that code isn't defined for your rom in your current definitions. Without seeing the rom it's hard to say - it's also possible that your 05 rom isn't compatible with your 06 ECU and you'll just have to copy the tune to the original rom from the ECU if you really want to use it.

Looks like I’m going to copy tables over.
I appreciate your time very much, thanks for the help!