RomRaider

Thought I add that this rom is cross-flashable ( ) with AE5Z510V

Thank you so much. I've been looking for these def for awhile.

Just noticed ignition timing comp for cl/ol transition table is missing. Which makes timing go really really low during that transition period. Would be a pretty nice table to have.

Do you have this table in your base already? I have addresses for this table if so

help finding missing dtc addresses usdm 2018 sti AE5Z000V

<table name="(P04AC) EVAP SYSTEM PURGE CONTROL VALVE B CIRCUIT LOW" storageaddress="?" />
<table name="(P04AD) EVAP SYSTEM PURGE CONTROL VALVE B CIRCUIT HIGH" storageaddress="?" />
<table name="(P04DB) CRANKCASE VENTILATION SYSTEM DISCONNECTED" storageaddress="?" />
<table name="(P04F0) EVAP SYSTEM HIGH PRESSURE PURGE LINE (CPC2) PERF" storageaddress="?" />
regards

EcuFlash doesn't show these DTCs

<include>32BITBASE</include>

<table name="(P04AC) EVAP SYSTEM PURGE CONTROL VALVE B CIRCUIT LOW" address="f2406"/>

<table name="(P04AD) EVAP SYSTEM PURGE CONTROL VALVE B CIRCUIT HIGH" address="f2407"/>

<table name="(P04DB) CRANKCASE VENTILATION SYSTEM DISCONNECTED" address="f240a"/>

<table name="(P050E) COLD START ENGINE EXHAUST TEMPERATURE OUT OF RANGE" address="f23c3"/>

<table name="(P0000) PASS CODE (NO DTC DETECTED)_" address="f236e"/>

<table name="(P013A) O2 SENSOR SLOW RESPONSE RICH TO LEAN B1 S2" address="f23e8"/>

<table name="(P013B) O2 SENSOR SLOW RESPONSE LEAN TO RICH B1 S2" address="f23e7"/>

<table name="(P013E) O2 SENSOR DELAYED RESPONSE RICH TO LEAN B1 S2" address="f23e6"/>

<table name="(P013F) O2 SENSOR DELAYED RESPONSE LEAN TO RICH B1 S2" address="f23e5"/>

<table name="(P015B) O2 SENSOR DELAYED RESPONSE LEAN TO RICH B1 S1" address="f23d7"/>

<table name="(P0201) INJECTOR CIRCUIT MALFUNCTION CYLINDER 1" address="f23c6"/>

<table name="(P0202) INJECTOR CIRCUIT MALFUNCTION CYLINDER 2" address="f23c9"/>

<table name="(P0203) INJECTOR CIRCUIT MALFUNCTION CYLINDER 3" address="f23c8"/>

<table name="(P0204) INJECTOR CIRCUIT MALFUNCTION CYLINDER 4" address="f23c7"/>

<table name="(P0351) IGNITION COIL A PRIMARY/SECONDARY CIRCUIT MALFUNCTION" address="f23ee"/>

<table name="(P0352) IGNITION COIL B PRIMARY/SECONDARY CIRCUIT MALFUNCTION" address="f23ed"/>

<table name="(P0353) IGNITION COIL C PRIMARY/SECONDARY CIRCUIT MALFUNCTION" address="f23ec"/>

<table name="(P0354) IGNITION COIL D PRIMARY/SECONDARY CIRCUIT MALFUNCTION" address="f23eb"/>

<table name="(P2404) EVAP LEAK DETECTION PUMP SENSE CIRCUIT RANGE/PERF" address="f23e3"/>

<table name="(P2610) ECM/PCM INTERNAL ENGINE OFF TIMER PERFORMANCE" address="f23d3"/>

The addresses for RomRaider if someone need them.

<table name="(P04AC) EVAP SYSTEM PURGE CONTROL VALVE B CIRCUIT LOW" storageaddress="F367B" />

<table name="(P04AD) EVAP SYSTEM PURGE CONTROL VALVE B CIRCUIT HIGH" storageaddress="F367C" />

<table name="(P04Af) EGH" storageaddress="F3686" />

<table name="(P04DB) CRANKCASE VENTILATION SYSTEM DISCONNECTED" storageaddress="F367F" />

<table name="(P04F0) EVAP SYSTEM HIGH PRESSURE PURGE LINE (CPC2) PERF" storageaddress="F3687" />

still wont show , have the latest 32bit base

Table names need to match with the names in the "32BITBASE".

I apologize if I'm not asking this question correctly, but if there is information missing in the definitions will I be loading a ROM onto my car that has missing information? For example, let's say the definitions are missing information. If I pull the ROM from my car, make no changes, save it and then flash that unchanged ROM back to my car, am I now flashing a ROM back to my car that is missing information because the definitions were missing information? Sorry if that doesn't make sense. I'm new to RR and ECUFlash and just looking to make some minor adjustment to the SI drive settings in my 2020 STI. But, I want to understand how both work first. Thanks.

Are you saying the definitions linked in this post are missing the codes or are you saying the definitions linked in this post now have the codes added?

No, you never changed the ROM.
Definitions only provide a human readable representation of selected areas of the ROM file. Definitions do not add or remove any data from the ROM, otherwise it would fail to flash to the ECU.

Definitions attached include the missing DTC entries.

Thanks for the clarification. Much appreciated.

I dont think I do. Which base has this?

I am trying to get

<table name="AF 3 Correction Limits" address="unknown" type="2D" level="1" scaling="A/FLearning#1Limits(%)">
<table name="X" type="Static X Axis" elements="2">
<data>High</data>
<data>Low</data>
</table>
</table>

But I don't know the right address. Any help is greatly appreciated and donation will follow. I have to be able to turn this off. Thanks