RomRaider

Hi everybody

I have a very rare, limited edition Land Rover Defender with a factory-fitted M52 328i engine. Due to neglect and abuse by the previous owner, the cylinder heads cracked short after I purchased the vehicle in 2011. The repair was not successful.

I eventually performed an engine swap last year. After a year-long nightmare, my Landy is still not running.

I sent the ECU in for repairs. The technician promised that he flashed the ECU (Siemens Ms41.0 Index 9) with a stock map to delete the Unichip, and to delete the immobilizer. Apparently, he did not do it. I have already cut the Unichip harness, so now I am stuffed.

I bought a K + DCAN USB cable, and I am hoping to obtain a stock map here so that I can return the ECU to its original state.

Iam not a new member, it was loong time ago when i had last time E36 and probably my old account has deleted.

Right now i have to take many logs to start dial in M52B28 with M50 intake , custom cams and few minor exhaust tweaks.

Hi
nice to find a forum for bmw ecu. i own a bmw e39 1998 520i

hello my name is tony and i am the owner of an bmw e36 323I and i would like to obtain the definition for ms41 to modify my car

thank you for your job!

Hi. I am miska and i have bmw e36 320i and i am looking for ms 41 definitionfiles, then i can start tuning my ecu.

hi my name is Randall i am just geting into ecu flashing and i have a couple of bmws wich i want to try and flash

Hola soy Javier.

Vivo en Vigo, España. Tengo un bmw e30 con swap a motor m52b28. Llevo una ecu ms41 comprada por ebay que esta programada para arbol de levas de s52b32 us. Mi motor tiene arboles de levas originales de m52b28, colectores de admisión m50 y colectores de escape supersprint.

El coche funciona bien. Pero tiene un exceso de gasolina en la combustión y no pasa la prueba de emisiones en la itv(inspección periódica de vehiculos en españa). Necesito modificar parametros para evitar esto.

Halo!

Drift team from finland. We have a e36 328 cabrio as a "summer car" and going to do some upgrades with it as a N/A. Cams, intake, exhaust etc. and tune the ms41.

Hey there. my name is Troy. im from Iowa, in the US. i have a 96 328is and a 97 M3 Shell. I have to swap everyting from the 96 to the 97, then it will be a drift car. i would like to be able to get access so i can delete and restrictions, and in casew the Ews causes a fit. i also want to tune for power to match my mods and increase Rev limit

Hi Guys

I'm from Guatemala, i tuned my Evo 8 before and now i just bought a E36 M3 1998. My bmw came with a made up tune and just wanted to bring the car back to stock.

Thank you!
Jose

Hey i have 318ti with a m52 swap looking to do a pop and bang tune

My name is James I have a 1997 m3 with the original S52. have new injectors m50 intake full catless exhaust brand new pucked clutch lightweight flywheel and 19k mile transmission I just put in. I need to get this thing tuned correctly it is not responding well to the mods I already rebuilt entire vanos and new solenoid which it did desperately need. These logging tools will help me find out exactly what is wrong so I can enjoy driving my e36 before the summer is over. Thank you to whoever created these definitions.

Hi everyone! My name is Martin from Bulgaria.
I have BMW E36 96' m52b20 and currently I want ECU so I can edit my map to be more aggressive. Maybe sooner when I'll upgrade to m52b28 I'll want to build up pop-corn and rev limiter generally.
Thats it!

Hey i'm from germany and currently drive a 328i E36 Coupe Tracktool. since an engine tuning is coming up soon i'm here.

i dont know if i am just not able to find the defenitions for the car i'm looking for.

are defenition files exist for the m52b28 EU version?

Hey guys, I have been a bmw owner for 10+ yrs and am sick and tired of tuning services that lack competence, therefore I want to learn how to at least tune my e36/e46/e38 with MS41 ecus. I would appreciate access approval so I can begin my journey.