RomRaider

Currently looked at all the definitions in the repository and I saw that Touring was there and most of the common ones but I was out of luck with the base 350z so I was just curious if there would be one compatible. Just got my 350z and it’s my first car and I wanted to play around with tuning, I would only be able to donate $20 bucks for the definition file but I would appreciate it.

DTCs are not detected correctly.

<rom base="AC705">
<romid>
<xmlid>CF005</xmlid>
<hwid>5ZVSUNH</hwid>
<internalidaddress>A14E</internalidaddress>
<internalidstring>CF005</internalidstring>
<ecuid>CF005</ecuid>
<year>2005</year>
<market>USDM</market>
<make>Nissan</make>
<model>350Z</model>
<submodel>-</submodel>
<transmission>MT</transmission>
<memmodel>SH7058</memmodel>
<flashmethod>nisprog</flashmethod>
<filesize>1024kb</filesize>
</romid>


<checksum type="std" start="0" end="0xFFFFF" sumloc="0x7B54" xorloc="0x7B4C"/>

</rom>

I sent you a pm, I attached the dumped rom if you could check it out.

Dumped rom is correct.
viewtopic.php?f=65&t=11098&p=170232&hilit=CF005#p170232

I downloaded a CF000 bin and modified it using rom raider and it all went well until I got check engine and couldn't accelerate past 2,000 rpms around that, I guess its a checksum issue but I was unable to get my dumped rom CF005 working with romraider I modified the xml file exactly how you stated and I get an exception error upon loading it with the definition file. I just ended flashing the stock rom back and its fine. sorry if I'm bothering you unintentionally.

I didn't say that bin roms are the same. I said the definitions CF000 AC700 AC705 AC800 CF005 CF010 CF100 CF105 JWTCF are the same. Learn to use RomRaider first before writing anything non-native to the ECU.