ISO: 08-14 EJ257/D25 SAVCS w/ TD06 20g, stock fuel map

EastCoastNBWrx · **Joined:** Thu Sep 19, 2024 4:17 pm **Posts:** 5

As the posts states, I’m seeking anyone that may have something I can run until I finish upgrading to FMIC, Bigger injectors, etc.

08 WRX with a 15’ EJ257 short block, D25 Single AVCS heads (8:77:1 CR, East Coast about 600ft elevation) newly mounted TD06SL2 GTX3071 ball bearing. Stock injectors, stock top mount, Grimmspeed 3 port, TGV delete, secondary air delete, catless DP. Conservative is key here until can finish installing the remaining bolt ons and get with my tuner in person. Thanks in advance!

25fxti · **Joined:** Sat Jun 22, 2019 8:31 am **Posts:** 67

If you need something to get going, you can try copy some of maps shared 2006 FXT 6MT STI EJ257 ARASHI G25/660 TD06SL2 viewtopic.php?f=29&t=18706

that was map that hit 315whp, very conservative.

EastCoastNBWrx · **Joined:** Thu Sep 19, 2024 4:17 pm **Posts:** 5

25fxti wrote:

If you need something to get going, you can try copy some of maps shared 2006 FXT 6MT STI EJ257 ARASHI G25/660 TD06SL2 viewtopic.php?f=29&t=18706

that was map that hit 315whp, very conservative.

I will go over now, super helpful! Thanks!
My ECU is still tuned for my VF52, peaking 20psi with the current set up (minus the 20g) so I thought I’d be relatively okay, that was until I found out what 26lbs up the on-ramp felt like

Thank god for ARP studs :lol:

25fxti · **Joined:** Sat Jun 22, 2019 8:31 am **Posts:** 67

Get FMIC and you will be fine with 26 pounds :mrgreen:

RomRaider

Forum rules

ISO: 08-14 EJ257/D25 SAVCS w/ TD06 20g, stock fuel map

Who is online