|
RomRaider
Documentation
Community
Developers
|
 
|
Page 1 of 1
|
[ 8 posts ] |
|
| Author |
Message |
|
Xxargon
|
Post subject: Have finished setting up, look, do you have any comments?  Posted: Mon Nov 11, 2024 10:57 am |
|
 |
| Newbie |
Joined: Wed Jul 10, 2024 3:37 am
Posts: 4
|
|
the first experience, the car goes well, can be better
jdm
Td06-20g
|
|
| Top |
|
 |
|
bludgod
|
Post subject: Re: Have finished setting up, look, do you have any comments Posted: Tue Nov 12, 2024 7:04 am |
|
|
| Moderator |
 |
Joined: Sat Jul 06, 2013 8:55 am
Posts: 3264
Location: NI
|
|
you'd really need to include your rom and a log of the car to get an idea of how well its running.
_________________
Good luck and may the logs be ever in your favour!
|
|
| Top |
|
|
|
Xxargon
|
Post subject: Re: Have finished setting up, look, do you have any comments Posted: Tue Nov 12, 2024 7:36 am |
|
|
| Newbie |
Joined: Wed Jul 10, 2024 3:37 am
Posts: 4
|
bludgod wrote: you'd really need to include your rom and a log of the car to get an idea of how well its running.
| Attachments: |
File comment: my rom
RRR.zip [72.65 KiB]
Downloaded 23 times
|
|
|
| Top |
|
|
|
bludgod
|
Post subject: Re: Have finished setting up, look, do you have any comments Posted: Tue Nov 12, 2024 9:49 am |
|
|
| Moderator |
|
Joined: Sat Jul 06, 2013 8:55 am
Posts: 3264
Location: NI
|
|
that's the rom yes, but also need to see a log of how it runs along with knowing what modifications to the car?
_________________
Good luck and may the logs be ever in your favour!
|
|
| Top |
|
|
|
Xxargon
|
Post subject: Re: Have finished setting up, look, do you have any comments Posted: Tue Nov 12, 2024 11:05 am |
|
|
| Newbie |
Joined: Wed Jul 10, 2024 3:37 am
Posts: 4
|
bludgod wrote: that's the rom yes, but also need to see a log of how it runs along with knowing what modifications to the car?
| Attachments: |
File comment: Added a log.
ej205avcs
525cc
td06-20g
pipe 76 from the turbine
compression 10,5
The car is driving well, since it is the first experience of configuring the SD, so maybe someone will see errors in the ROM
romraiderlog_20241028_131035.csv [562.27 KiB]
Downloaded 22 times
|
|
|
| Top |
|
|
|
bludgod
|
Post subject: Re: Have finished setting up, look, do you have any comments Posted: Tue Nov 12, 2024 11:11 am |
|
|
| Moderator |
|
Joined: Sat Jul 06, 2013 8:55 am
Posts: 3264
Location: NI
|
|
can't see your wideband readings in this log - you can't tune it properly without that so ideally you'd have the wideband logged as well along with a decent 2nd gear pull in the logs to get an idea of how its running. The front o2 can't really be trusted once you get anywhere near boost - even moved to behind the turbo like most JDM cars I wouldn't trust it enough to tune off it.
_________________
Good luck and may the logs be ever in your favour!
|
|
| Top |
|
|
|
Xxargon
|
Post subject: Re: Have finished setting up, look, do you have any comments Posted: Tue Nov 12, 2024 12:15 pm |
|
|
| Newbie |
Joined: Wed Jul 10, 2024 3:37 am
Posts: 4
|
bludgod wrote: can't see your wideband readings in this log - you can't tune it properly without that so ideally you'd have the wideband logged as well along with a decent 2nd gear pull in the logs to get an idea of how its running. The front o2 can't really be trusted once you get anywhere near boost - even moved to behind the turbo like most JDM cars I wouldn't trust it enough to tune off it. I set it up by AEM, the AFR on the fuel card is +-1%. I have a question about the correctness of the "injection time" setting, taking into account AVCS. And there is a problem on cold start, AFR 18:1 and low RPM
|
|
| Top |
|
|
|
bludgod
|
Post subject: Re: Have finished setting up, look, do you have any comments Posted: Tue Nov 12, 2024 1:30 pm |
|
|
| Moderator |
|
Joined: Sat Jul 06, 2013 8:55 am
Posts: 3264
Location: NI
|
on stock 550's the default values for warm up should work fine. look at your VE table though as high idle/cold start will be a different RPM/MAP location vs warm idle. If your fuel is too weak then the RPM cannot rise to target. injection angle you can use a flat 360 to start you off and make fine adjustments later once your other tables are all dialled in - some excellent information here: https://romraider.com/forum/viewtopic.php?f=15&t=18357&p=159016
_________________
Good luck and may the logs be ever in your favour!
|
|
| Top |
|
|
|
|
Page 1 of 1
|
[ 8 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 1 guest |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
