Learning View v1.0 RC3　error

indy.GDB · **Joined:** Mon Nov 08, 2021 9:17 am **Posts:** 1

The OpenPort 2.0 I was using was broken and I bought a new one.

Until then, I was able to use Learning View, but after switching to the new OpenPort, I got an error and it disappeared.

The log is described as below, but I do not know how to deal with it.

Could you please tell me the solution?

There is no problem with RomRaider and EcuFlash.

Log

[08: 50: 47.4478716] Learning View version 1.0 RC3

[08: 50: 49.5538753] PassThruOpen returned 0 and DeviceID 1
[08: 50: 49.5694754] PassThruReadVersion returned 0
[08: 50: 49.5850754] Device firmware version: 1.17.4877
[08: 50: 49.5850754] DLL version: 1.00.3721 Jan 9 2013 17:24:55
[08: 50: 49.6006754] API version: 04.04
[08: 50: 49.6162754] PassThruConnect returned 0 and ChannelID 3
[08: 50: 50.1778764] PassThruStartMsgFilter returned 0
[08: 50: 50.2090765] ECU Init
[08: 50: 50.2714766] PassThruWriteMsgs returned 0
[08: 50: 50.2714766] WRITE 6 bytes: 80 10 F0 01 BF 40
[08: 50: 52.2994802] PassThruReadMsgs returned 16
[08: 50: 52.3150802] PassThruGetLastError returned 16, Message: no data was read
[08: 50: 55.8874865] A read error has occured: PassThru Error
[08: 50: 55.9030865] PassThruDisconnect returned 0
[08: 50: 55.9342865] PassThruClose returned 0

Mark_Bowley · **Posted:** Sun Aug 28, 2022 1:25 pm

Indy,

Did you get to the bottom of this, I get the same error after a new op2

Mark...

mihael · **Joined:** Mon Sep 03, 2012 6:31 am **Posts:** 12

Same here... I have this error for years now and have been using RomRaider instead. But I would love to use LearningView again. As far as I remember it occured after an update of the Tactrix software. Does anybody have a solution?

greyhairhoon · **Posted:** Fri Jan 10, 2025 5:09 am

Hello. Been away for a while. I have this same error with learning view, has anyone fixed it or know what it is.
I just got an engine check light come on and I want to look at the error codes in learning view.
Thanks.

RomRaider

Forum rules