|
RomRaider
Documentation
Community
Developers
|
| Author |
Message |
|
SubbieNoobie
|
Post subject: Request Torque Not Going to Specified Value  Posted: Mon Jan 13, 2025 5:55 pm |
|
 |
| Newbie |
Joined: Mon Jan 13, 2025 5:46 pm
Posts: 9
|
I have a situation where i have my requested torque for sport # calling for 420 but its only going to ~300 or ~350 Attachment:
Req Torqu.jpg [ 289.88 KiB | Viewed 1313 times ]
https://datazap.me/u/subbienoobie/log-1 ... data=16-35Does anyone know what would be causing this ? 2013 Subaru STI Sedan USDM
|
|
| Top |
|
 |
|
bludgod
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Tue Jan 14, 2025 11:40 am |
|
|
| Moderator |
 |
Joined: Sat Jul 06, 2013 8:55 am
Posts: 3264
Location: NI
|
|
what happens if you turn off traction control?
_________________
Good luck and may the logs be ever in your favour!
|
|
| Top |
|
|
|
SubbieNoobie
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Tue Jan 14, 2025 11:50 am |
|
|
| Newbie |
Joined: Mon Jan 13, 2025 5:46 pm
Posts: 9
|
|
| Top |
|
|
|
SubbieNoobie
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Tue Jan 14, 2025 11:58 am |
|
|
| Newbie |
Joined: Mon Jan 13, 2025 5:46 pm
Posts: 9
|
For Reference here's more of the tables... I'm not even sure what the Calculated torque one does... I think that's the one to do with traction control but not 100% sure Regardless similar behavior with traction control on and off Attachment:
Throttle Plate Opening Angle.jpg [ 522.69 KiB | Viewed 1308 times ]
Attachment:
Request Torque Accelerator Pedal.jpg [ 412.22 KiB | Viewed 1308 times ]
Attachment:
Calculated Torque.jpg [ 723.56 KiB | Viewed 1308 times ]
Attachment:
Base.jpg [ 304.79 KiB | Viewed 1308 times ]
Last edited by SubbieNoobie on Tue Jan 14, 2025 12:01 pm, edited 1 time in total.
|
|
| Top |
|
|
|
bludgod
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Tue Jan 14, 2025 11:58 am |
|
|
| Moderator |
|
Joined: Sat Jul 06, 2013 8:55 am
Posts: 3264
Location: NI
|
|
and does it do the same thing on stock rom without the patch applied?
_________________
Good luck and may the logs be ever in your favour!
|
|
| Top |
|
|
|
SubbieNoobie
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Tue Jan 14, 2025 12:04 pm |
|
|
| Newbie |
Joined: Mon Jan 13, 2025 5:46 pm
Posts: 9
|
bludgod wrote: and does it do the same thing on stock rom without the patch applied? On the stock Rom i have data from the past where it did hit 420 in Sport # I don't think it always does though Unfortunately I have ethanol in the tank right now so I cant switch back to see
|
|
| Top |
|
|
|
bludgod
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Tue Jan 14, 2025 2:35 pm |
|
|
| Moderator |
|
Joined: Sat Jul 06, 2013 8:55 am
Posts: 3264
Location: NI
|
|
ok so start comparing your patched tune to your stock tune and see where the differences lie - when your out of E switch to pump gas and try the stock file again to see if it still logs the full request just to confirm nothing has changed in the car.
_________________
Good luck and may the logs be ever in your favour!
|
|
| Top |
|
|
|
SubbieNoobie
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Tue Jan 14, 2025 3:22 pm |
|
|
| Newbie |
Joined: Mon Jan 13, 2025 5:46 pm
Posts: 9
|
bludgod wrote: ok so start comparing your patched tune to your stock tune and see where the differences lie - when your out of E switch to pump gas and try the stock file again to see if it still logs the full request just to confirm nothing has changed in the car. For the throttle maps there was no change, there the exactly the same. Ill switch back to the pump gas unmodded rom when i get a chance but i think its going to do the same thing
|
|
| Top |
|
|
|
cortin
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Tue Jan 14, 2025 3:44 pm |
|
|
| Experienced |
Joined: Sun Oct 26, 2014 2:59 pm
Posts: 244
Location: Russia
|
SubbieNoobie wrote: bludgod wrote: ok so start comparing your patched tune to your stock tune and see where the differences lie - when your out of E switch to pump gas and try the stock file again to see if it still logs the full request just to confirm nothing has changed in the car. For the throttle maps there was no change, there the exactly the same. Ill switch back to the pump gas unmodded rom when i get a chance but i think its going to do the same thing ROM id?
_________________
https://vk.com/cortin_ecu
|
|
| Top |
|
|
|
SubbieNoobie
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Tue Jan 14, 2025 6:58 pm |
|
|
| Newbie |
Joined: Mon Jan 13, 2025 5:46 pm
Posts: 9
|
cortin wrote: SubbieNoobie wrote: bludgod wrote: ok so start comparing your patched tune to your stock tune and see where the differences lie - when your out of E switch to pump gas and try the stock file again to see if it still logs the full request just to confirm nothing has changed in the car. For the throttle maps there was no change, there the exactly the same. Ill switch back to the pump gas unmodded rom when i get a chance but i think its going to do the same thing ROM id? AE5L500V For the stock ROM ZE5L500V_DM23100 Dime mod version I don't want to openly post the Rom and definitions. I have a tuner that mostly works on COBB that's helped me with a lot of the maps. Not sure how he would feel about me sharing his maps But if anyone would like to take a look i can send it over PM; Just ask
|
|
| Top |
|
|
|
SubbieNoobie
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Thu Jan 16, 2025 7:17 pm |
|
|
| Newbie |
Joined: Mon Jan 13, 2025 5:46 pm
Posts: 9
|
|
| Top |
|
|
|
bludgod
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Fri Jan 17, 2025 6:28 am |
|
|
| Moderator |
|
Joined: Sat Jul 06, 2013 8:55 am
Posts: 3264
Location: NI
|
|
have you tested with the unpatched file yet just to confirm?
_________________
Good luck and may the logs be ever in your favour!
|
|
| Top |
|
|
|
SubbieNoobie
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Mon Mar 03, 2025 9:32 pm |
|
|
| Newbie |
Joined: Mon Jan 13, 2025 5:46 pm
Posts: 9
|
|
sorry for taking so long to respond. I was out of the country for a month for work
I've tested with the un-modified rom and got the same result
I also checked that the Hand Brake, Stop Light, and Brake Switch function correctly
|
|
| Top |
|
|
|
zero knowledge
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Tue Mar 04, 2025 7:40 am |
|
|
| RomRaider Donator |
 |
Joined: Thu Dec 06, 2012 7:25 pm
Posts: 64
|
|
Your logged target boost seems low. If your floor mat isn't misplaced, log accelerator pedal angle.
_________________
Zubaru.tuninK at gmail
|
|
| Top |
|
|
|
Ders
|
Post subject: Re: Request Torque Not Going to Specified Value Posted: Thu Mar 06, 2025 4:38 am |
|
|
| RomRaider Donator |
Joined: Wed Mar 12, 2014 7:02 am
Posts: 41
Location: Brisbane, Australia
|
|
I didn't see Accelerator Pedal Angle anywhere in your logs - are you sure the ECU is seeing 100% input from the pedal?
_________________
2004 FXT 4EAT. VF41.
2012 GRB STi. 1.5XTR. DimeMod.
|
|
| Top |
|
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
