RomRaider

This thread contains definitions for the M5.2 DME used for the M44B19 motors.
Only 667 software is my primary focus however some work has been done to include the later model US 668 DMEs.
Unlike siemens MS4x DMEs, these cannot be flashed interchangeably i.e. only 667 software on 667 DME and only 668 software on 668 DME.

The definitions will be managed on github as that will allow me greater flexibility in managing contributions:
https://github.com/ba114/M5.2
Stock 667 binary files can also be found on the GitHub and are attached here.

Please do not post map addresses in this thread. If you can use romraider, you can use github. Create an account and create a pull request if you have changes you want incorporated.
This thread will be updated as new maps/contributions are merged into the master.

New defintions pushed to github.

Many new maps added including Alpha-N

Hi!
Definitions not work my ecu file.
What my problem?
Thanks very much

Hi! I'm trying to modify the map of my car that is only used on the track. I have a wideband lambda probe installed. According to the raider rom there are 2 part throttle maps. Shouldn't there be a full load enrichment map? In raider rom it is not defined, and in wols I can't define it. Is it possible that this ecu doesn't have a wot fuel map and only uses the part throttle maps part 1 and part 2? Thanks.

Hi,

Good question, I have the same one.
Did you find any infos on this?

Thanks

this is a big v long shot but if anyones see this are the able to help me raise the rev limiter it create a map pack for this ecu its the bosch m5.2 ecu part num 0261203667 i have included full and partial binary