STICKY: New Members Thread!

maxima5353 · **Joined:** Wed Feb 05, 2025 6:37 am **Posts:** 1

Hello. My name is Ali. I built a turbo for my BMW E36 and I need to do its software. Thank you.

Bray323i · **Joined:** Wed Oct 15, 2025 9:36 pm **Posts:** 1

hey guys my name is Brayden. Im here to get the definitions so i can tune out engine lights on my 1998 bmw 323i vert.

Mourot · **Joined:** Thu Oct 16, 2025 2:49 pm **Posts:** 1

Hi, I'm Matisse a french drifter, I have an e39, an E46 and an e36. I want to do some tuning on my 328i e36 to run E85 and other stuff.
So I'm here to learn and share some knowledge.
I also need the definition files to tune my E36

Thanks

Hardeek · **Joined:** Sat Oct 18, 2025 2:56 pm **Posts:** 1

Hello everyone, especially the founders of this forum. My name is Kamil. I have an E36, originally an M50B20, currently an M52B28. I had a small problem after the swap and found help here. I'm hoping to access the files; I'd like to modify the ECU map for the M50 intake manifold. Best regards Kamil

Gzuz707 · **Joined:** Fri Oct 17, 2025 3:46 pm **Posts:** 1

Hey my name's Jesus. Im just here to get the ecu definitions and maybe make a little bit more power in my stock 96 328.

Burak TURHAN · **Joined:** Tue Feb 25, 2025 3:25 pm **Posts:** 1

Hello, I'm Burak. I have a 1994 model e36 car and I want to play with it a little.

Drexxon · **Joined:** Mon Oct 20, 2025 1:53 pm **Posts:** 1

Hi! i have bmw e36 328 with M50 mainfold. I want ms41 ecu definitions to remove EWS

ufukkalyoncu · **Joined:** Mon Oct 20, 2025 3:03 pm **Posts:** 7

Hello i am Ufuk. İ have 94 model e34 with m50b30 and m52 harness and ms41 ecu swapped in it. Looking to tune it with romraider. Thx for letting merhaba in

yugiau4 · **Joined:** Mon Sep 29, 2025 3:57 pm **Posts:** 2

Hello everyone im Yavor. I got 520i. Great forum with great information !

bigdawg · **Joined:** Mon Oct 27, 2025 7:57 am **Posts:** 1

Hello, Im Tyler, E36 318ti, looking to have a mess around and see what i can learn ECU wise, and to delete the dreaded EWS!

zetkol · **Joined:** Mon Oct 27, 2025 9:30 am **Posts:** 1

Hello, im Jussi from Finland. I have build a m52b25 engine, and are here to learn more about ecu flashing/tuning.

CZARNY12_34 · **Joined:** Thu Oct 30, 2025 12:39 pm **Posts:** 2

Hi, I'm new here and I'm looking for advice on some cool pops or fake antilag and nice shots during gear changes. Maybe someone has some maps or knows how to do it really well and wants to share?

CGrabbe · **Posted:** Sun Nov 02, 2025 5:50 pm

I am Chris, I have several Z3 cars with 2.8l engines. Looking at diving off into the finer sides of tuning for them. Staying N/A until the whole chassis is ready for more. For now want to experiment with fueling, air and delete all the things they don’t need for morphing into track cars.

mapaz · **Joined:** Mon Nov 03, 2025 6:33 pm **Posts:** 1

hi, i’d need the definition files for my e39 520i winter car so i can tune the vanos maps, torque areas, and fueling. i’ve gotten used to working on my m52-swapped e46, and it’s impressive how much difference it makes when you enrich the torque zones and fine-tune the maps.

MILe36 · **Joined:** Tue Nov 04, 2025 1:23 pm **Posts:** 1

Hi I'm matt and I'm from the uk. I have a e36 m52b25 that I'm currently boosting. I'm looking to get a base map file to flash onto my ecu. iv installed romraider and looking forward to learning how it all works and maybe in the near future tuning my own thanks.

RomRaider

Forum rules

STICKY: New Members Thread!

Who is online