RomRaider

Greetings all....

Very much a noob here and keen to learn.

Attached is my ROM lifted with ECUFlash.
Can somebody please take a look and help me with a Definition( as far as I can tell that is the next step to get it into RomRaider)

PS I have a log file and Gyno graph which were done/taken at the same time.

Mods on my car...
VF35 Turbo
STI Intercooler/Scoop
Full Bosal Exhaust
Prodrive Y pipe
Tari Remap
GReddy Profsec B II EBC, set to bosst 1,2 - 1,25 bar.

Thx.

SeanV-

Please do not post tuned ROMS by Cobb, EcuTek, Prodrive, etc here.

I know you were just trying to get a set of definitions created, but the way to do this would be to post a stock ROM.

Please see:
http://www.romraider.com/forum/viewtopic.php?t=315

For more info.

Thanks!
Mike

Thx Mike, I did read the "rules" and since my ROM is none of those I didn't see it as a problem.

It was tuned from stock by Calvin himself from Tari fame.

Sean-

My apologies- In my haste, I saw EcuFlash and thought I saw EcuTek.

Please feel free to repost.

My day job is getting in the way of my recreational activities

Mike

NP Mike

Just a bump for those of u who can help me with a definiton, I added the attachment back in after Mike mistakenly removed it

Thanks Sean for complying with the rules - and thanks Mike for following up

Just downloaded this file from the Tari forums.

It seems to contain a whole lot of map offsets which I assume is needed to do the defintion file?

Hopefully this will be of help to whoever is gonna do me a huge fav and make me a def file for my ROM

BTW, it also tells me my case ID is AF770.

Thx again.

PS, this is the link to the zip file which contains a whole bunch of map offsets for various ROMS.

http://www.tari.co.za/download/other/rom.offsets.zip

I'll try to get that added. Your version has the funky wastegate duty tables. If you look at Calvin's offsets, you see an intial and max wastegate duty for Auto and none for the manual. And then you have manual and auto target boost tables. Not sure what exactly is going on there, but I can update the definitions file and then you can try it by zeroing out both wastegate tables and if you get wastegate pressure then we know that the manual uses those wastegate tables.