RomRaider

New rev033 test release is available for download and testing.

This revision should fix issues people have had applying MAF & Injector changes to tables from the respective logger tabs.

I have also made a small change to the AEM UEGO connection handling which needs to be tested. Anyone with a UEGO who can help out here?

Awesome, paul. I'll try the maf/inj. changes, in a minute..

Just a quick question, can I effectively open the rom, and display the MAF table and Injector Scalar table at the same time, for the update functions, respectively?

Yes, you can even run and record data on the MAF and injector tabs at the same time (not that you'd probably ever need to), interpolate on each and apply from each. As long as the correct rom is open and selected in the editor, you don't need to have the exact tables to be updated open (although I recommend you do so you can verify the changes).

Ok, thanks. I'll go out now, and checkit..

I will test this revision tonight and try out the injector tab. Thanks for all the hard work.

kascade,

just did some test on rev028 a short while ago on my 16 bit ecu (03 Euro STi - A4RM100H) and the MAF tab works fine. I was able to log, dots appear on the graph (it took some time before the dots appear on the graph - maybe about 5 minutes after starting the logging) , do an interpolation and do an update to my MAF table. After applying the changes, I could see the changes in the cells of my MAF Scalar table (with red/blue outlines).

But after applying the changes, when I switch back to the logger, nothing happens from thereon i.e no more dots appear on the graph, I could not do an interpolation or update to my MAF scalar table. I'm not sure if this intended i.e. I need to exit romraider totally and re-start after applying changes to my MAF table before I can do any logging again.

I have an LM-1 purchased about 2 months back but did not have time to test it today. Will do so with rev033. Will let you know of the outcome.

Thanks for the awesome work!

I just tested it on my USDM 16bit 02.
Everything works! I didn't try to re-record after making changes, but can, if you need me to..

anyone have a problem with file logging not logging anything but the header? I used to get this sometimes but it was ok after restart romraider, today (rev 28) it seemed to be linking the the profile xml I was using. It was ok after I set the parameters from scratch vs loading the xml. Sucks to do a logging run and then get nothing.

almost as bad as logging for 45 minutes, only to get a BSOD about 3 minutes before you stop logging..
That happened to me this afternoon LOL

But it was laptop-related. It's done it before..

bleh

Yeah the logger should really be syncing often so this doesn't happen. I only assume you can do this Java. Do you have a core 2 duo/multiprocessor?

Intel 4M 2.2GHz, 2GB ram. Gateway 600YG2 15.5"

I did 2 iterations of my MAF on the way home, about 30-40mins each logtime.

Mickey, testes and I had my MAF scale really close.. Then I had to move my MAF 3" closer to the turbo. The MAF was about 3" after a 90* bend. Now it's 6" away, trying to cut down on turbulence at the sensor. Of course this threw my MAF scalar off..

I will say, though, that I filled up just before getting home today. 13.6gal, 360mi., and I had to squeeze 13.6 in it. 26.4mpg.. I'm quite happy with that!

Well that has hyperthreading, so it might be the openport drivers, check the openecu forum.

Thanks for making the revisions Kascade!!!

I'll give it a shot tomorrow, sorry no UEGO to test for you.

dm

kascade, I noticed that under the "About" tab in the logger there are still name and URL references to the project's old name. That might be a piece of low-hanging fruit you could clean up too

Anything particular you would like tested with rev033?

kascade,

I've just tested rev033 with my LM-1 and it works like a charm, right from the first time I plug in the serial output from my LM-1 console to my laptop (I remember that I had to try several times to get my LC-1 to work). But I think I need more logging hours on LM-1 to confirm every works fine coz on my LC-1 after about an hour of logging, sometimes it hangs, the reading shows something like 20.93 and the value doesn't change.

I've compared the readings from the LM-1 console and the values displayed on romraider and it matches (just that romraider shows 2 decimal points but LM-1 shows 1 decimal point).

Thanks so much for having LM-1 integration in this release!