04 and 05 USDM WRX MT: testes1010's STG2 93 octane map(s)

testes1010 · **Posted:** Tue Nov 11, 2008 12:56 pm

Requirements:
- stock intake(drop in filter is ok)
- Turboback exhaust
- catless uppipe
- 93 octane ONLY
- 2 complete turns in on the wastegate actuator to hit target(18.25psi, although power graph below is at 16.25psi)

USE AT YOUR OWN RISK.

Note: Map was tuned near sea level.

EDIT: Added 2004 WRX map based on 2005 WRX map 09/29/2009

05wrx · **Posted:** Fri May 15, 2009 10:44 pm

I have all the required mods, save for 93oct. I live in CO and we can only get 91oct here. Could I splash in some SUNOCO or E85 to make each full tank 93oct and run this map?

Is it safe to run 18psi on the stock turbo? I'm not at sea level either. 5600ft.

bb1988 · **Joined:** Sat May 16, 2009 4:10 am **Posts:** 1

I just flashed this map today....I did turn turns on the wastegate, but still cant reach target boost. I just purchased a boost controller and waiting for it to come it...the map seemed to work well for me. I had my friend who is an advanced tuner who took logs for me without any knock or much timing correction and said that map looked well. I could feel some good gains specially through first and second gear....gunna up the boost to about 18 and see where that puts me.

05wrx · **Posted:** Tue May 19, 2009 8:10 am

bb1988 wrote:

I just flashed this map today....I did turn turns on the wastegate, but still cant reach target boost. I just purchased a boost controller and waiting for it to come it...the map seemed to work well for me. I had my friend who is an advanced tuner who took logs for me without any knock or much timing correction and said that map looked well. I could feel some good gains specially through first and second gear....gunna up the boost to about 18 and see where that puts me.

Was this map your first? I am looking to move over to it from a Cobb OTS Stage 2 map, so I'm hoping the gains/smoothness are noticeable.

testes1010 · **Posted:** Tue May 19, 2009 2:13 pm

05wrx wrote:

I have all the required mods, save for 93oct. I live in CO and we can only get 91oct here. Could I splash in some SUNOCO or E85 to make each full tank 93oct and run this map?

Is it safe to run 18psi on the stock turbo? I'm not at sea level either. 5600ft.

I would not recommend running this map in its current form on anything less than 93 octane. At 5600ft with 93octane would recommend lots & lots of logging.

05wrx · **Posted:** Tue May 19, 2009 5:45 pm

testes1010 wrote:

05wrx wrote:

I have all the required mods, save for 93oct. I live in CO and we can only get 91oct here. Could I splash in some SUNOCO or E85 to make each full tank 93oct and run this map?

Is it safe to run 18psi on the stock turbo? I'm not at sea level either. 5600ft.

I would not recommend running this map in its current form on anything less than 93 octane. At 5600ft with 93octane would recommend lots & lots of logging.

Can you tweak it slightly for 91 octane and 5600+ft elevation and make it available as a base map? There are a lot of us here in Colorado who would really appreciate it

testes1010 · **Posted:** Tue May 19, 2009 6:55 pm

05wrx wrote:

Can you tweak it slightly for 91 octane and 5600+ft elevation and make it available as a base map? There are a lot of us here in Colorado who would really appreciate it

I would need to do some email log swapping with someone with several map revisions before 'posting' a tested version.

05wrx · **Posted:** Tue May 19, 2009 6:59 pm

testes1010 wrote:

05wrx wrote:

Can you tweak it slightly for 91 octane and 5600+ft elevation and make it available as a base map? There are a lot of us here in Colorado who would really appreciate it

I would need to do some email log swapping with someone with several map revisions before 'posting' a tested version.

I'm willing to partake in the project if you're up for it.

testes1010 · **Posted:** Tue May 19, 2009 7:29 pm

05wrx wrote:

testes1010 wrote:

05wrx wrote:

Can you tweak it slightly for 91 octane and 5600+ft elevation and make it available as a base map? There are a lot of us here in Colorado who would really appreciate it

I would need to do some email log swapping with someone with several map revisions before 'posting' a tested version.

I'm willing to partake in the project if you're up for it.

pm me your email, I'll send you a test map.

sleepybear · **Joined:** Tue Dec 02, 2008 2:16 am **Posts:** 6

Will this map work ok running a cattless 3" TBE, APS 65mm CAI, and a APS TMIC in addition to what you have posted above???

testes1010 · **Posted:** Mon Jun 08, 2009 2:57 pm

sleepybear wrote:

Will this map work ok running a cattless 3" TBE, APS 65mm CAI, and a APS TMIC in addition to what you have posted above???

I would do lots of logging due to the intake but otherwise should be fine.

sleepybear · **Joined:** Tue Dec 02, 2008 2:16 am **Posts:** 6

OK thanks for the reply and everything you do for the community...

mesk8in247 · **Joined:** Wed Jul 01, 2009 12:31 pm **Posts:** 2

testes, i sent you a pm on nasioc. let me know

05wrx · **Posted:** Tue Sep 29, 2009 7:24 am

Would this be safe to run on an 04 WRX? I thought the 04/05 ECU was very similar... I just don't see any 2004 maps on here. Trying to help get my friend a base map to start.

testes1010 · **Posted:** Tue Sep 29, 2009 12:51 pm

05wrx wrote:

Would this be safe to run on an 04 WRX? I thought the 04/05 ECU was very similar... I just don't see any 2004 maps on here. Trying to help get my friend a base map to start.

I have not tried to run a 05 map on an 04 WRX, so I cannot say. I just added a 2004 WRX map in the #1 post maps copied over from my 2005 WRX map.

RomRaider

Forum rules

04 and 05 USDM WRX MT: testes1010's STG2 93 octane map(s)

Who is online