RomRaider

I get the same org.xml error when i try to log the def for the logger.

anyone knows why or how to fix it ?

Open the XML file in Notepad. Delete the space character right before the tag
<?xml version="1.0" encoding="UTF-8"?> on the first line. Save the file and try logging again.

Just done that, no use

Hey guys I tuned one of these a few weeks ago. All went well other than I could not log rough knock correction only fine. I tried both the standard logger defs and the "2010 defs" in this thread.

Has anyone else had this problem, did I just miss something?

Thanks
Josh

It appears that Knock Correction Advance is not supported in this ROM as a standard parameter.

I also noticed that there was not Fuel ranges A,B,C,D available to log. Any chance these will be added? I know merch is now working for cobb but any chance this rom can be added to learning view?

Thanks again guys!

Josh

I am tuning a 2010 wrx and noticed a few perams missing
Feedback knock correction
closed lopp to open loop status
manifold relative pressure direct
Those are just the few that I think are pertinant to being able to tune correctly. I tried writing a new def but I seem to be missing the correct addresses, Any body care to share a def with those working perams or at least the correct address? I can log manifold relative pressure corrected but the car is at altitude so I would rather be able to log the direct peram for mrp.

Never mind! i got it working, the format was wrong on the logger def Andy posted for whatever reason. Here is the logger def I reworked the format on and it loaded right up. LMK if it works for you other guys having problems...

ED

Nice! I will have a look again the next chance I get.

Josh

Some revisions have been made by dschultz, please see first post for link.

Andy

thank you! these worked great... appreciate the hard work.. thank you....

I cannot get the extended parameters to show in the logger so I can select them. I loaded all the definitions using the ECU definition function and it still does not work? How are you guys getting this to work? What am I doing wrong?